SNIP_ADAPTIVE_CAN_FIGURE_Figure_3_96

Figure 3.96: Modeling of the DeterministicClientResourceNeeds Class DeterministicClientResource Package M2::AUTOSART emplates::AdaptivePlatform::ApplicationDesign::ProcessDesign Note This meta-class specifies computing resource needs of DeterministicClient library functions. Tags:atp.Status=draft Base ARObject Aggregated by DeterministicClientResourceNeeds.initResource, DeterministicClientResourceNeeds.runResource Attribute Type Mult. Kind Note numberOf Instructions NormalizedInstruction 0..1 attr This attribute represents the normalized runtime consumption on the target system within one DeterministicClient::WaitForActivation cycle, assuming the "worst-case" runtime where the workers would be executed sequentially . Tags:atp.Status=draft sequential Instructions Begin NormalizedInstruction 0..1 attr Normalized sequential runtime at the beginning of the DeterministicClient::WaitForActivation cycle (which mostly cannot be parallelized), before the main usage of the worker pool starts. Tags:atp.Status=draft sequential InstructionsEnd NormalizedInstruction 0..1 attr WaitForActivation cycle (which mostly cannot be parallelized), after the main usage of the worker pool has ended. Tags:atp.Status=draft speedup Float 0..1 attr This attribute defines how much faster the calculations within one DeterministicClient::WaitForActivation cycle can be finished if numberOfWorkers are physically available, i.e. if enough cores were available on the machine to perform parallel execution of all workers (sequential runtime / parallelized runtime). Tags:atp.Status=draft Table 3.171: DeterministicClientResource