SNIP_ADAPTIVE_CAN_FIGURE_Figure_7_9_ADAPTIVEPLATFORMTIMINGEXTENSIONS

Figure 7.9: SporadicEventTriggering Class SporadicEventTriggering Package M2::AUTOSART emplates::CommonStructure::Timing::TimingConstraint::EventT riggeringConstraint Note The SporadicEventT riggering describes the behavior of an event which occurs occasionally or singly . Base ARObject, EventT riggeringConstraint, Identifiable, MultilanguageReferrable, Referrable, Timing Constraint, T raceable Attribute Type Mult. Kind Note jitter MultidimensionalTime 0..1 aggr The maximum jitter of the sporadic event occurrence. Jitter=max |nthPeriod - standardPeriod| Tags:xml.sequenceOffset=30 maximumInter ArrivalTime MultidimensionalTime 1 aggr The maximum time distance between two consecutive occurrences of the associated event. Tags:xml.sequenceOffset=20 minimumInter ArrivalTime MultidimensionalTime 1 aggr The minimum time distance between two consecutive occurrences of the associated event. Tags:xml.sequenceOffset=10 period MultidimensionalTime 0..1 aggr The period of the event occurrence. Tags:xml.sequenceOffset=40 Table 7.4: SporadicEventTriggering This is a generalization of the periodic event triggering described in subsection 7.1.1. The difference is that the event can, but not necessarily shall occur. For this reason, there is one additional parameter required for the specification of the SporadicEventTriggering, namely the maximumInterArrivalTime, which specifies the largest possible time distance between two event occurrences. The Sporadic Event T riggering is characterized by the following parameters: • Minimum Inter-Arrival Time