SNIP_CLASSIC_CANIF_FIGURE_Figure_7_3

Figure 7.3: Example of assignment of HTHs and HRHs to the Hardware Objects. The numbering of HTHs and HRHs are implementation specific. The chosen numbering is only an example. [SWS_Can_00276] ⌈The function Can_Write shall store the swPduHandle that is given inside the parameter PduInfo until the Can module calls the CanIf_TxConfirmation for this request where the swPduHandle is given as parameter.⌋ The feature of [SWS_Can_00276] is used to reduce time for searching in the CanIf module implementation. [SWS_Can_00016] Upstream requirements: SRS_Can_01051 ⌈The Can module shall call CanIf_TxConfirmation to indicate a successful transmission. It shall either called by the TX-interrupt service routine of the corresponding HW resource or inside the Can_MainFunction_Write in case of polling mode. ⌋