SNIP_CLASSIC_CANTP_SECTION_7_1_3_Transmit_cancellation

7.1.3 Transmit cancellation The transmit cancellation feature allows the upper layer to cancel a transmission in progress. Use case: Cancel a diagnostic transmission due to the reception of another diagnostic protocol with higher priority. [SWS_CanTp_00242] ⌈This feature shall be (de)activated by static configuration (parameter CanTpTc).⌋ [SWS_CanTp_00274] ⌈Transmit Cancellation is triggered by the call of CanTp_CancelTransmit().⌋ [SWS_CanTp_00243] ⌈After the call of the service CanTp_CancelTransmit(), the transfer on this connection shall be aborted.⌋ Note: The Api PduR_CanTpTxConfirmation() shall be called after a transmit cancellation with value E_NOT_OK. (see also [SWS_CanTp_00255]) Note that if a transfer is in progress, that will generate a time-out error on the receiver side.