SNIP_CLASSIC_CAN_SECTION_8_6_2_Optional_interfaces

8.6.2 Optional interfaces This section defines all interfaces, which are required to fulfill an optional functionality of the module. [SWS_CANIF_00294] Definition of optional interfaces requested by module Can If ⌈ API Function Header File Description Can_CheckWakeup Can.h This function checks if a wakeup has occurred for the given controller. Can_SetBaudrate Can.h This service shall set the baud rate configuration of the CAN controller. Depending on necessary baud rate modifications the controller might have to reset. CanSM_CheckTransceiverWakeFlag Indication CanSM_CanIf.h This callback function indicates the CanIf_Check TrcvWakeFlag API process end for the notified CAN Transceiver. CanSM_ClearTrcvWufFlagIndication CanSM_CanIf.h This callback function shall indicate the CanIf_Clear TrcvWufFlag API process end for the notified CAN Transceiver. CanSM_ConfirmCtrlPnAvailability (draft) CanSM_CanIf.h This callback function indicates that the controller is running in PN communication mode. Tags: atp.Status=draft CanSM_ConfirmPnAvailability CanSM_CanIf.h This callback function indicates that the transceiver is running in PN communication mode. CanSM_ControllerBusOff CanSM_CanIf.h This callback function notifies the CanSM about a bus-off event on a certain CAN controller, which needs to be considered with the specified bus-off recovery handling for the impacted CAN network. CanSM_ControllerModeIndication CanSM_CanIf.h This callback shall notify the CanSM module about a CAN controller mode change. CanSM_TransceiverModeIndication CanSM_CanIf.h This callback shall notify the CanSM module about a CAN transceiver mode change. CanTrcv_CheckWakeFlag CanTrcv.h Requests to check the status of the wakeup flag from the transceiver hardware. ▽ △ API Function Header File Description CanTrcv_CheckWakeup CanTrcv.h Service is called by underlying CANIF in case a wake up interrupt is detected. CanTrcv_GetBusWuReason CanTrcv.h Gets the wakeup reason for the Transceiver and returns it in parameter Reason. CanTrcv_GetOpMode CanTrcv.h Gets the mode of the Transceiver and returns it in OpMode. CanTrcv_SetOpMode CanTrcv.h Sets the mode of the Transceiver to the value Op Mode. CanTrcv_SetWakeupMode CanTrcv.h Enables, disables or clears wake-up events of the Transceiver according to TrcvWakeupMode. CanXL_Write CanXL.h This function is called by CanIf to pass a CAN XL message to the CAN XL driver for transmission. It provides the CAN XL specific parameters besides the hardware handle and actual PDU information. Det_ReportError Det.h Service to report development errors. EcuM_ValidateWakeupEvent EcuM.h After wakeup, the ECU State Manager will stop the process during the WAKEUP VALIDATION state/ sequence to wait for validation of the wakeup event.This API service is used to indicate to the ECU Manager module that the wakeup events indicated in the sources parameter have been validated. IdsM_SetSecurityEventWithContext Data (obsolete) IdsM.h This API is the application interface to report security events with context data to the IdsM. Tags: atp.Status=obsolete LSduR_CanIfRxIndication (draft) LSduR_CanIf.h Indication of a received PDU from a lower layer communication interface module. LSduR_CanIfTriggerTransmit (draft) LSduR_CanIf.h Within this API, the upper layer module (called module) shall check whether the available data fits into the buffer size reported by PduInfoPtr->Sdu Length. If it fits, it shall copy its data into the buffer provided by PduInfoPtr->SduDataPtr and update the length of the actual copied data in PduInfoPtr->Sdu Length. If not, it returns E_NOT_OK without changing PduInfoPtr. LSduR_CanIfTxConfirmation (draft) LSduR_CanIf.h The lower layer communication interface module confirms the transmission of a PDU, or the failure to transmit a PDU. Mirror_ReportCanFrame Mirror.h Reports a received or transmitted CAN frame. All received CAN frames that pass the hardware acceptance filter are reported, independent of the software filter configuration. Transmitted CAN frames are reported when the transmission is confirmed. ⌋