SNIP_CLASSIC_COMM_SECTION_8_4_1_2_EcuM_ValidateWakeupEvent

8.4.1.2 EcuM_ValidateWakeupEvent [SWS_EcuM_02829] Definition of callback function EcuM_ValidateWakeupEvent Upstream requirements: SRS_ModeMgm_00003, SRS_BSW_00359, SRS_BSW_00360 ⌈ Service Name EcuM_ValidateWakeupEvent Syntax void EcuM_ValidateWakeupEvent ( EcuM_WakeupSourceType sources ) Service ID [hex] 0x14 Sync/Async Synchronous Reentrancy Reentrant Parameters (in) sources Events that have been validated Parameters (inout) None Parameters (out) None Return value None Description After wakeup, the ECU State Manager will stop the process during the WAKEUP VALIDATION state/sequence to wait for validation of the wakeup event.This API service is used to indicate to the ECU Manager module that the wakeup events indicated in the sources parameter have been validated. Available via EcuM.h ⌋ [SWS_EcuM_04078] Upstream requirements: SRS_ModeMgm_00003 ⌈EcuM_ValidateWakeupEvent sets (OR-operation) all events passed as a bit set in the sources in parameter (EcuM_WakeupSourceType bitmask) in the internal validated wakeup events variable.⌋ See also section 7.6.3 Internal Representation of Wakeup States. [SWS_EcuM_04079] Upstream requirements: SRS_ModeMgm_00003 ⌈EcuMValidateWakeupEvent shall invoke BswM_EcuM_CurrentWakeup with its sources parameter and state value ECUM_WKSTATUS_VALIDATED.⌋ [SWS_EcuM_02645] Upstream requirements: SRS_ModeMgm_00003 ⌈EcuM_ValidateWakeupEvent shall invoke ComM_EcuM_WakeUpIndication for each wakeup event if the EcuMComMChannelRef parameter (see ECUC_Ecu M_00101) in the EcuMWakeupSource configuration container for the corresponding wakeup source is configured.⌋ [SWS_EcuM_02868] Upstream requirements: SRS_ModeMgm_00003, SRS_BSW_00350 ⌈If EcuMDevErrorDetect is enabled and the sources parameter contains an unknown (unconfigured) wakeup source, EcuM_ValidateWakeupEvent shall ignore the call and report the ECUM_E_UNKNOWN_WAKEUP_SOURCE to Det.⌋ [SWS_EcuM_02345] Upstream requirements: SRS_ModeMgm_00003, SRS_BSW_00333 ⌈EcuM_ValidateWakeupEvent shall be callable from interrupt context and task context.⌋ [SWS_EcuM_02790] Upstream requirements: SRS_ModeMgm_00003 ⌈EcuM_ValidateWakeupEvent shall return without effect for all sources except communication channels when called while the ECU Manager module is in the RUN state.⌋ [SWS_EcuM_02791] Upstream requirements: SRS_ModeMgm_00003 ⌈EcuM_ValidateWakeupEvent shall have full effect in any ECU Phase for those sources that correspond to a communication channel (see [SWS_EcuM_02645]).⌋ [SWS_EcuM_04140] Upstream requirements: SRS_ModeMgm_00003 ⌈EcuM_ValidateWakeupEvent shall invoke ComM_EcuM_PNCWakeUpIndication for each wakeup event and for every referenced PNC if at least one EcuMComMPNCRef parameter (see ECUC_EcuM_00228) in the EcuMWakeupSource configuration container for the corresponding wakeup source is configured.⌋