SNIP_CLASSIC_DET_SECTION_8_1_3_5_Det_ReportTransientFault

8.1.3.5 Det_ReportTransientFault [SWS_Det_01003] Definition of API function Det_ReportTransientFault Status: OBSOLETE Upstream requirements: SRS_BSW_00310 ⌈ Service Name Det_ReportTransientFault (obsolete) Syntax Std_ReturnType Det_ReportTransientFault ( uint16 ModuleId, uint8 InstanceId, uint8 ApiId, uint8 FaultId ) Service ID [hex] 0x05 Sync/Async Synchronous Reentrancy Reentrant ModuleId Module ID of calling module. InstanceId The identifier of the index based instance of a module, starting from 0, If the module is a single instance module it shall pass 0 as the InstanceId. ApiId ID of API service in which transient fault is detected (defined in SWS of calling module) Parameters (in) FaultId ID of detected transient fault (defined in SWS of calling module). Parameters (inout) None Parameters (out) None Return value Std_ReturnType If no callout exists it shall return E_OK, otherwise it shall return the value of the configured callout. In case several callouts are configured the logical or (sum) of the callout return values shall be returned. Rationale: since E_OK=0, E_OK will be only returned if all are E_OK, and for multiple error codes there is a good chance to detect several of them. Description Service to report transient faults. If a callout has been configured than this callout shall be called and the returned value of the callout shall be returned. Otherwise it returns immediately with E_OK. Tags: atp.Status=obsolete Available via Det.h ⌋