SNIP_CLASSIC_ECUM_SECTION_8_5_2_4_EcuM_AL_DriverInitOne

8.5.2.4 EcuM_AL_DriverInitOne [SWS_EcuM_02907] Definition of configurable interface EcuM_AL_DriverInitOne Upstream requirements: SRS_BSW_00101, SRS_ModeMgm_00001, SRS_ModeMgm_00020 ⌈ Service Name EcuM_AL_DriverInitOne Syntax void EcuM_AL_DriverInitOne ( void ) Service ID [hex] 0x33 Sync/Async Synchronous Reentrancy Non Reentrant Parameters (in) None Parameters (inout) None Parameters (out) None Return value None Description This callout shall provide driver initialization and other hardware-related startup activities in case of a power on reset. Available via EcuM_Externals.h ⌋ The ECU Manager module invokes EcuM_AL_DriverInitOne in the PreOS Sequence (see section 7.3.2 Activities in StartPreOS Sequence) The ECU Manager module configuration tool must generate a default implementation of the EcuM_AL_DriverInitOne callout from the sequence of modules defined in the EcuMDriverInitListOne configuration container (see ECUC_EcuM_00111). See also [SWS_EcuM_02559] and [SWS_EcuM_02730]. Besides driver initialization, the following initialization sequences should be considered in this block: MCU initialization according to AUTOSAR_SWS_Mcu_Driver chapter 9.1.