SNIP_CLASSIC_ERRORDESCRIPTION_SECTION_6_2_3_2_5_NVRAM_Manager

6.2.3.2.5 NVRAM Manager Description of the AUTOSAR standard errors Detection Depending on the stack configuration:  Polling of the job result MEMIF_JOB_FAILED by the function MemIf_GetJobResult (see Memory Abstraction Interface above).  Notification by FEE with the callback function NvM_JobErrorNotification (see Flash Eeprom emulation above). Reaction N/A Report  [SWS_NvM_00470] [SWS_NvM_00546] If a loss of redundancy is detected, the job result is set to NVM_REQ_REDUNDANCY_FAILED and NVM_E_LOSS_OF_REDUNDANCY error is reported to the DEM.  [SWS_NvM_00470] If there is use of ROM data during recovery the job result is set to NVM_REQ_RESTORED_FROM_ROM.  [SWS_NvM_00279] [SWS_NvM_00288] If the recovery mechanisms “read retry” “read redundant block” and “read ROM block” fail, the error NVM_E_REQ_FAILED is reported to the DEM. Depending on the configuration :  [SWS_NvM_00451] [SWS_NvM_00359] [SWS_NvM_00213] The error shall be polled by the user with the function NvM_GetErrorStatus (job result set to NVM_REQ_NOT_OK).  [SWS_NvM_00113] [SWS_NvM_00260] The error shall be reported to the user via the configurable callbacks SingleBlockCallbackFunction or MultiBlockCallbackFunction. Recovery  [SWS_NvM_00390] [SWS_NvM_00171] [SWS_NvM_00172] [SWS_NvM_00391] [SWS_NvM_00388] The NVRAM Manager controls the error recovery mechanism. The recovery mechanisms consist of (if configured) “read retry”, “read redundant block” and “read ROM block”.