SNIP_CLASSIC_FRIF_SECTION_7_3_3_1_FlexRay_Source_Bus_Activation

7.3.3.1 FlexRay Source Bus Activation After initialization, the FlexRay Interface module does not report any frames to the Bus Mirroring module. [SWS_Mirror_00036] Upstream requirements: SRS_Mirror_00010 ⌈When Mirror_StartSourceNetwork is called to start a FlexRay source bus, the Bus Mirroring module shall call FrIf_EnableBusMirroring with FrIf_MirroringActive set to TRUE to start reporting of received and transmitted FlexRay frames from the corresponding FlexRay cluster.⌋ Mirror_StartSourceNetwork receives a ComMChannelId as network, while FrIf_EnableBusMirroring expects a FrIfClstIdx as FrIf_ClstIdx. The translation of the one to the other can be determined at generation time by following the references from the ComMChannelId to the the related FrIfClstIdx through the ECU configuration. [SWS_Mirror_00037] Upstream requirements: SRS_Mirror_00010 ⌈When Mirror_StopSourceNetwork is called to stop a FlexRay source bus, the Bus Mirroring module shall call FrIf_EnableBusMirroring with FrIf_MirroringActive set to FALSE to stop reporting of received and transmitted FlexRay frames from the corresponding FlexRay cluster.⌋