SNIP_CLASSIC_FRIF_SECTION_8_3_2_FrIf_ControllerInit

8.3.2 FrIf_ControllerInit [SWS_FrIf_05004] Definition of API function FrIf_ControllerInit Upstream requirements: SRS_Fr_05031 ⌈ Service Name FrIf_ControllerInit Syntax Std_ReturnType FrIf_ControllerInit ( uint8 FrIf_CtrlIdx ) Service ID [hex] 0x03 Sync/Async Synchronous Reentrancy non reentrant for identical values of FrIf_CtrlIdx, reentrant for different values of FrIf_CtrlIdx Parameters (in) FrIf_CtrlIdx Index of the FlexRay CC to address. Parameters (inout) None Parameters (out) None Return value Std_ReturnType E_OK: The call of the FlexRay Driver’s API service has returned E_OK. E_NOT_OK: The call of the FlexRay Driver’s API service has returned E_NOT_OK, or an error has been detected in development mode. Description Initialized a FlexRay CC. Available via FrIf.h ⌋ [SWS_FrIf_05158] ⌈If parameter FrIf_CtrlIdx of FrIf_ControllerInit has an invalid value and if development error detection is enabled (i.e. FrIfDevErrorDetect equals ON), the function FrIf_ControllerInit shall report development error code FRIF_E_INV_CTRL_ IDX to the Det_ReportError service of the DET module.⌋ [SWS_FrIf_05159] ⌈The function FrIf_ControllerInit shall wrap the FlexRay Driver API function Fr_ControllerInit() by: 1. Translating (based on static FrIf module configuration) the FlexRay CC index Fr If_CtrlIdx into a tuple (FlexRay Driver | Driver-specific CC index Fr_CtrlIdx). 2. Calling Fr_ControllerInit() of the determined FlexRay Driver module with the parameters determined as described above. ⌋ [SWS_FrIf_05160] ⌈Caveats of FrIf_ControllerInit: The FlexRay Interface module has to be initialized with a call of FrIf_Init() before this API service may be called, see [SWS_FrIf_05003]⌋