SNIP_CLASSIC_FRSM_SECTION_8_3_1_FrSM_Init

8.3.1 FrSM_Init [SWS_FrSM_00013] Definition of API function FrSM_Init Upstream requirements: SRS_BSW_00405, SRS_BSW_00438, SRS_BSW_00310, SRS_BSW_ 00358, SRS_BSW_00460, SRS_BSW_00485 ⌈ Service Name FrSM_Init Syntax void FrSM_Init ( const FrSM_ConfigType* FrSM_ConfigPtr ) Service ID [hex] 0x01 Sync/Async Synchronous Reentrancy Non Reentrant Parameters (in) FrSM_ConfigPtr Pointer to a selected configuration structure Parameters (inout) None Parameters (out) None Return value None Description Initializes the FlexRay State Manager. Available via FrSM.h ⌋ [SWS_FrSM_00126] Upstream requirements: SRS_BSW_00438, SRS_BSW_00101 ⌈The FrSM_Init function shall initialize the state machines for all FlexRay clusters and set them into the state FRSM_READY, i.e. perform transition T00.⌋ [SWS_FrSM_00127] Upstream requirements: SRS_BSW_00438, SRS_BSW_00483 ⌈The FrSM_Init function shall internally store the configuration data address to enable subsequent API calls to access the configuration data.⌋ [SWS_FrSM_00128] Upstream requirements: SRS_BSW_00438 ⌈If development error detection is enabled (FrSMDevErrorDetect is ON), the FrSM_ Init function shall remember internally the successful initialization for other API functions to check for proper module initialization.⌋