SNIP_CLASSIC_FRSM_SECTION_8_3_5_FrSM_AllSlots

8.3.5 FrSM_AllSlots [SWS_FrSM_00172] Definition of API function FrSM_AllSlots Upstream requirements: SRS_BSW_00310, SRS_BSW_00460, SRS_BSW_00484 ⌈ Service Name FrSM_AllSlots Syntax Std_ReturnType FrSM_AllSlots ( NetworkHandleType NetworkHandle ) Service ID [hex] 0x05 Sync/Async Asynchronous Reentrancy Reentrant for different FlexRay clusters Parameters (in) NetworkHandle This parameter identifies the FlexRay cluster for which a communication mode is requested. Parameters (inout) None Parameters (out) None Return value Std_ReturnType E_OK: Request accepted E_NOT_OK: Request not accepted Description This API function can be used to leave the KeySlotOnlyMode. Available via FrSM.h ⌋ [SWS_FrSM_00197] ⌈The FrSM_AllSlots function shall be pre compile time configurable ON/OFF by the configuration parameter FrSMAllSlotsSupport⌋ [SWS_FrSM_00171] ⌈The FrSM_AllSlots function shall call FrIf_AllSlots for each controller of the FlexRay cluster. It shall return E_OK if each of these calls returned E_ OK, otherwise FrSM_AllSlots shall return E_NOT_OK.⌋ [SWS_FrSM_00168] Upstream requirements: SRS_BSW_00369, SRS_BSW_00323, SRS_BSW_00350 ⌈If development error detection is enabled and the parameter NetworkHandle has an invalid value, the FrSM_AllSlots function shall raise the development error code FRSM_E_INV_HANDLE and the FrSM_AllSlots function shall return E_NOT_OK.⌋ [SWS_FrSM_00169] Upstream requirements: SRS_BSW_00406, SRS_BSW_00350 ⌈If development error detection is enabled and the FrSM module has not been initialized using FrSM_Init, the FrSM_AllSlots function shall raise the development error code FRSM_E_UNINIT and the FrSM_AllSlots function shall return E_NOT_ OK.⌋