SNIP_CLASSIC_FR_SECTION_8_4_24_Fr_GetWakeupRxStatus

8.4.24 Fr_GetWakeupRxStatus [SWS_Fr_00587] Definition of API function Fr_GetWakeupRxStatus ⌈ Service Name Fr_GetWakeupRxStatus Syntax Std_ReturnType Fr_GetWakeupRxStatus ( uint8 Fr_CtrlIdx, uint8* Fr_WakeupRxStatusPtr ) Service ID [hex] 0x2b Sync/Async Synchronous Reentrancy Non Reentrant for the same device Parameters (in) Fr_CtrlIdx Index of FlexRay CC within the context of the FlexRay Driver. Parameters (inout) None Parameters (out) Fr_WakeupRxStatusPtr Address where bitcoded wakeup reception status shall be stored. Bit 0: Wakeup received on channel A indicator Bit 1: Wakeup received on channel B indicator Bit 2-7: Unused Return value Std_ReturnType E_OK: API call finished successfully. E_NOT_OK: API call aborted due to errors. Description Gets the wakeup received information from the FlexRay controller. Available via Fr.h ⌋ [SWS_Fr_00588] ⌈The function Fr_GetWakeupRxStatus() shall perform the following tasks on FlexRay CC Fr_CtrIdx: 1. Read the wakeup pattern received indicators for channel A and channel B and write it to the output parameter Fr_WakeupRxStatusPtr. The value of *Fr_WakeupRxStatusPtr is bitcoded with the following meaning (Bit 0 = LSB, Bit 7 = MSB): Bit 0 Wakeup pattern received on channel A (1), otherwise (0) Bit 1 Wakeup pattern received on channel B (1), otherwise (0) Bit 2 Not used (always 0) Bit 3 Not used (always 0) Bit 4 Not used (always 0) Bit 5 Not used (always 0) Bit 6 Not used (always 0) Bit 7 Not used (always 0) 2. Reset the wakeup received indication status information within the FlexRay controller. 3. Return E_OK. ⌋ [SWS_Fr_00589] ⌈If the function Fr_GetWakeupRxStatus() is able to and detects a hardware error while performing the requested functionality, then it shall call Dem_SetEventStatus() (FR_E_CTRL_TESTRESULT, DEM_EVENT_STATUS_FAILED) and return E_NOT_OK.⌋ [SWS_Fr_00590] ⌈If development error detection for the Fr module is enabled, and if the function Fr_GetWakeupRxStatus() is called before the successful initialization of Fr, then the function Fr_GetWakeupRxStatus() shall raise the development error FR_E_INIT_FAILED.⌋ [SWS_Fr_00591] ⌈If development error detection for the Fr module is enabled, then the function Fr_GetWakeupRxStatus() shall check the validity of the parameter Fr_CtrlIdx. If Fr_CtrlIdx is invalid, then the function Fr_GetWakeupRxStatus() shall raise the development error FR_E_INV_CTRL_IDX.⌋ [SWS_Fr_00592] ⌈If development error detection for the Fr module is enabled, then the function Fr_GetWakeupRxStatus() shall check whether the parameter Fr_WakeupRxStatusPtr is a NULL pointer (NULL_PTR). If Fr_WakeupRxStatusPtr is a NULL pointer, then the function Fr_GetWakeupRxStatus() shall raise the development error FR_E_PARAM_POINTER.⌋