SNIP_CLASSIC_FR_SECTION_8_4_4_Fr_AllowColdstart

8.4.4 Fr_AllowColdstart [SWS_Fr_00114] Definition of API function Fr_AllowColdstart ⌈ Service Name Fr_AllowColdstart Syntax Std_ReturnType Fr_AllowColdstart ( uint8 Fr_CtrlIdx ) Service ID [hex] 0x23 Sync/Async Asynchronous Reentrancy Non Reentrant for the same device Parameters (in) Fr_CtrlIdx Index of FlexRay CC within the context of the FlexRay Driver. Parameters (inout) None Parameters (out) None Return value Std_ReturnType E_OK: API call finished successfully. E_NOT_OK: API call aborted due to errors. Description Invokes the CC CHI command ’ALLOW_COLDSTART’. Available via Fr.h ⌋ Note: The Fr Module’s environment shall only call the function Fr_AllowColdstart() when the CC Fr_CtrlIdx is in POCState ’POC:ready or POC:startup. [SWS_Fr_00182] ⌈The function Fr_AllowColdstart() shall perform the following tasks on FlexRay CC Fr_CtrIdx: 1. Invoke the CC CHI command ’ALLOW_COLDSTART’. 2. Return E_OK. ⌋ [SWS_Fr_00181] ⌈If the function Fr_AllowColdstart() is able to and detects a hardware error while performing the requested functionality, then it shall call Dem_SetEventStatus() (FR_E_CTRL_TESTRESULT, DEM_EVENT_STATUS_FAILED) and return E_NOT_OK.⌋ [SWS_Fr_00178] ⌈If development error detection for the Fr module is enabled, and if the function Fr_AllowColdstart() is called before the successful initialization of Fr, then the function Fr_AllowColdstart() shall raise the development error FR_E_INIT_FAILED.⌋ [SWS_Fr_00179] ⌈If development error detection for the Fr module is enabled, then the function Fr_AllowColdstart() shall check the validity of the parameter Fr_CtrlIdx. If Fr_CtrlIdx is invalid, then the function Fr_AllowColdstart() shall raise the development error FR_E_INV_CTRL_IDX.⌋ [SWS_Fr_00180] ⌈The function Fr_AllowColdstart() shall check the CC Fr_CtrlIdx’s POCState. If the POCState is POC:default config, POC:config, or POC:halt, then the function Fr_AllowColdstart() shall raise the runtime error FR_E_INV_POCSTATE.⌋