SNIP_CLASSIC_LINSM_SECTION_6_Requirements_Tracing

6 Requirements Tracing The following tables reference the requirements specified in [3] and [9] and links to the fulfillment of these. Please note that if column “Satisfied by” is empty for a specific requirement this means that this requirement is not fulfilled by this document. Requirement Description Satisfied by [SRS_BSW_00004] All Basic SW Modules shall perform a pre-processor check of the versions of all imported include files [SWS_LinSM_00208] [SRS_BSW_00101] The Basic Software Module shall be able to initialize variables and hardware in a separate initialization function [SWS_LinSM_00155] [SRS_BSW_00167] All AUTOSAR Basic Software Modules shall provide configuration rules and constraints to enable plausibility checks [SWS_LinSM_00073] [SRS_BSW_00358] The return type of init() functions implemented by AUTOSAR Basic Software Modules shall be void [SWS_LinSM_00155] [SRS_BSW_00369] All AUTOSAR Basic Software Modules shall not return specific development error codes via the API [SWS_LinSM_00113] [SWS_LinSM_00122] [SWS_LinSM_00126] [SRS_BSW_00373] The main processing function of each AUTOSAR Basic Software Module shall be named according the defined convention [SWS_LinSM_00156] [SRS_BSW_00384] The Basic Software Module specifications shall specify at least in the description which other modules they require [SWS_LinSM_00001] [SWS_LinSM_00085] [SWS_LinSM_00086] [SWS_LinSM_00105] [SWS_LinSM_00196] [SRS_BSW_00406] API handling in uninitialized state [SWS_LinSM_00116] [SWS_LinSM_00125] [SWS_LinSM_00128] [SWS_LinSM_00131] [SWS_LinSM_00134] [SWS_LinSM_00137] [SRS_BSW_00407] Each BSW module shall provide a function to read out the version information of a dedicated module implementation [SWS_LinSM_00117] [SRS_BSW_00414] Init functions shall have a pointer to a configuration structure as single parameter [SWS_LinSM_00155] Table 6.1: Requirements Tracing