SNIP_CLASSIC_LINTRCV_SECTION_8_3_6_LinTrcv_CheckWakeup

8.3.6 LinTrcv_CheckWakeup [SWS_LinTrcv_00012] Definition of callback function LinTrcv_CheckWakeup Upstream requirements: SRS_BSW_00310, SRS_BSW_00369, SRS_BSW_00375, SRS_BSW_ 00406 ⌈ Service Name LinTrcv_CheckWakeup Syntax Std_ReturnType LinTrcv_CheckWakeup ( uint8 LinNetwork ) Service ID [hex] 0x07 Sync/Async Synchronous Reentrancy Reentrant Parameters (in) LinNetwork LIN network to which API call has to be applied. Parameters (inout) None Parameters (out) None Return value Std_ReturnType E_OK: API call has been accepted E_NOT_OK: API call has not been accepted Description Notifies the calling function if a wakeup is detected. Available via LinTrcv.h ⌋ [SWS_LinTrcv_00144] ⌈If development error detection for the module LinTrcv is enabled: If called before the LinTrcv module has been initialized, the function LinTrcv_CheckWakeup shall report the development error LINTRCV_E_UNINIT.⌋ [SWS_LinTrcv_00145] ⌈If development error detection for the module LinTrcv is enabled: If called with an invalid network number LinNetwork, the function LinTrcv_CheckWakeup shall report the development error LINTRCV_E_INVALID_LIN_NETWORK.⌋ [SWS_LinTrcv_00166] ⌈The function LinTrcv_CheckWakeup shall evaluate the wakeup on the addressed LIN network. When a wake-up event on the addressed LIN network is detected (e.g. dominant bus state or negative edge at wakeup pin), the function LinTrcv_CheckWakeup shall notify the ECU State Manager module immediately via the EcuM_SetWakeupEvent and LinIf via LinIf_WakeupConfirmation callback function.⌋ [SWS_LinTrcv_00167] ⌈If development error detection for the module LinTrcv is enabled: If the addressed LIN network is not in mode LINTRCV_TRCV_MODE_SLEEP, the function LinTrcv_CheckWakeup shall report the development error LINTRCV_ E_TRCV_NOT_SLEEP.⌋ Configuration: See configuration parameter LinTrcvWakeUpSupport.