SNIP_CLASSIC_LIN_SECTION_7_5_2_Requirements

7.5.2 Requirements [SWS_Lin_00032] Upstream requirements: SRS_Lin_01524 ⌈When the LIN channel enters sleep mode, it shall perform the transition to low-power mode of the LIN hardware unit (if available) (see Lin_GoToSleep / Lin_GoToSleepInternal).⌋ [SWS_Lin_00033] Upstream requirements: SRS_Lin_01560, SRS_Lin_01566 ⌈Each LIN channel shall be able to accept a sleep request independently of the other channel states (see Lin_GoToSleep / Lin_GoToSleepInternal).⌋ [SWS_Lin_00037] ⌈When a LIN channel is in LIN_CH_SLEEP state and wake-up detection is supported by configuration parameter LinChannelWakeupSupport, the LIN hardware unit shall monitor the bus for a wake-up request on that channel.⌋ [SWS_Lin_00043] ⌈Lin_Wakeup: If the LIN driver receives a wake-up request from the LIN interface, the requested channel shall send a wake-up pulse to the LIN bus. (see Lin_Wakeup)⌋ [SWS_Lin_00262] ⌈Lin_WakeupInternal: If the LIN driver receives an internal wake-up request from the LIN interface, the requested channel shall send no wake-up pulse to the LIN bus. (see Lin_WakeupInternal)⌋ For LIN Master nodes, the function Lin_GetStatus returns the current state of a given LIN channel.