DEENESPTFRRUARHIKOZHNL
CLASSIC Modul: pdur Rolle: constitutive Konfidenz: 95%

SNIP_CLASSIC_PDUR_SECTION_11_5_Post_build_considerations

Quelle: SWS_PDURouter.pdf (Seite 160) • Ziel-Anforderung: SWS_PduR_NA_00777

Wortlaut

11.5 Post-build considerations This section describes some important behavior when using the post-build variant of the PDU Router. It contains no requirements, just important issues that need to be considered. NVRAM and RAM memory size can potentially grow if a new post-build configuration is downloaded into the ECU. Estimation at design time must be done to allow such grow so other areas are not overwritten (in case of RAM) or memory borders are not crossed. It is not possible to configure restrictions/locations/etc of memory in the PduR module configuration since this is implementation specific and relitevly difficult to implement (pre-compile and link-time does not really need this). It is recommended for implementations of PduR module generators to extend the configuration with specific memory constraints if needed. A Not applicable requirements [SWS_PduR_NA_00777] Upstream requirements: SRS_BSW_00170, SRS_BSW_00375, SRS_BSW_00416, SRS_BSW_- 00437, SRS_BSW_00168, SRS_BSW_00425, SRS_BSW_00432, SRS_BSW_00336, SRS_BSW_00417, SRS_BSW_00386, SRS_GTW_- 06055, SRS_GTW_06056, SRS_GTW_06061, SRS_GTW_06098, SRS_GTW_06099, SRS_GTW_06077, SRS_GTW_06064, SRS_GTW_- 06089 ⌈These requirements are not applicable to this specification.⌋ B Change history of AUTOSAR traceable items Please note that the lists in this chapter also include traceable items that have been removed from the specification in a later version. These items do not appear as hyperlinks in the document. B.1 Traceable item history of this document according to AUTOSAR Release R22-11 B.1.1 Added Specification Items in R22-11 Number Heading [SWS_PduR_00921] [SWS_PduR_CONSTR_00920] [SWS_PduR_NA_- 00777] Table B.1: Added Specification Items in R22-11 B.1.2 Changed Specification Items in R22-11 Number Heading [SWS_PDUR_00816] [SWS_PduR_00100] [SWS_PduR_00333] [SWS_PduR_00334] [SWS_PduR_00338] [SWS_PduR_00341] [SWS_PduR_00362] [SWS_PduR_00365] [SWS_PduR_00369] [SWS_PduR_00375] [SWS_PduR_00381] [SWS_PduR_00406] [SWS_PduR_00424] [SWS_PduR_00507] [SWS_PduR_00512] ▽ △ Number Heading [SWS_PduR_00518] [SWS_PduR_00615] [SWS_PduR_00617] [SWS_PduR_00654] [SWS_PduR_00742] [SWS_PduR_00743] [SWS_PduR_00767] [SWS_PduR_00769] [SWS_PduR_00771] [SWS_PduR_00824] [SWS_PduR_91001] Table B.2: Changed Specification Items in R22-11 B.1.3 Deleted Specification Items in R22-11 Number Heading [SWS_PduR_00777] [SWS_PduR_00827] Table B.3: Deleted Specification Items in R22-11 B.1.4 Added Constraints in R22-11 none B.1.5 Changed Constraints in R22-11 none B.1.6 Deleted Constraints in R22-11 none

Versionen & Provenienz · Zugeordnete Anforderungen

Diese Angaben zeigt der Versions-Explorer.

Begründung & Zuweisungs-Evidenz

Cited verbatim in the snippet (deterministic citation).

Dokumenten-Herkunft & Rückverfolgbarkeit

Spezifikations-Dokument SWS_PDURouter.pdf
Dokumentseite Seite 160
Ziel-Modul pdur (classic)
Ziel-Anforderung SWS_PduR_NA_00777
Semantische Rolle constitutive
Automatisierungs-Konfidenz 0.95