SNIP_CLASSIC_PDUR_SECTION_8_3_1_4_PduR_EnableRouting

8.3.1.4 PduR_EnableRouting [SWS_PduR_00615] Definition of API function PduR_EnableRouting Upstream requirements: SRS_GTW_06120, SRS_BSW_00310 ⌈ Service Name PduR_EnableRouting Syntax void PduR_EnableRouting ( PduR_RoutingPathGroupIdType id ) Service ID [hex] 0xf3 Sync/Async Synchronous Reentrancy Reentrant Parameters (in) id Identification of the routing path group. Routing path groups are defined in the PDU router configuration. Parameters (inout) None Parameters (out) None Return value None Description Enables a routing path group. Available via PduR.h ⌋ [SWS_PduR_00647] Upstream requirements: SRS_GTW_06120, SRS_BSW_00323 ⌈If the routing path group id does not exist, then the PDU Router module shall return with no action.⌋ [SWS_PduR_00648] Upstream requirements: SRS_GTW_06120, SRS_BSW_00323 ⌈If the routing path group id does not exist and the PduRDevErrorDetect is enabled, the PDU Router module shall report PDUR_E_ROUTING_PATH_GROUP_ID_INVALID.⌋ [SWS_PduR_00899] Upstream requirements: SRS_GTW_06120 ⌈If the routing path group exists and the routing path group is already enabled, then the PDU Router module shall return with no action.⌋