SNIP_CLASSIC_PWM_SECTION_8_3_2_Pwm_DeInit

8.3.2 Pwm_DeInit [SWS_Pwm_00096] Definition of API function Pwm_DeInit ⌈ Service Name Pwm_DeInit Syntax void Pwm_DeInit ( void ) Service ID [hex] 0x01 Sync/Async Synchronous Reentrancy Non Reentrant Parameters (in) None Parameters (inout) None Parameters (out) None Return value None ▽ △ Description Service for PWM De-Initialization. Available via Pwm.h ⌋ [SWS_Pwm_00010] Upstream requirements: SRS_BSW_00336, SRS_SPAL_12163, SRS_Pwm_12381 ⌈The function Pwm_DeInit shall de-initialize the PWM module.⌋ [SWS_Pwm_00011] Upstream requirements: SRS_SPAL_12163 ⌈The function Pwm_DeInit shall set the state of the PWM output signals to the idle state.⌋ [SWS_Pwm_00012] Upstream requirements: SRS_SPAL_12163 ⌈The function Pwm_DeInit shall disable PWM interrupts and PWM signal edge notifications.⌋ [SWS_Pwm_10080] Upstream requirements: SRS_BSW_00171 ⌈The function Pwm_DeInit shall be pre compile time configurable On/Off by the configuration parameter: PwmDeInitApi.⌋ [SWS_Pwm_20080] Upstream requirements: SRS_BSW_00171 ⌈The function Pwm_DeInit shall be configurable On/Off by the configuration parameter PwmDeInitApi {PWM_DE_INIT_API}. Regarding error detection, the requirements [SWS_Pwm_00117], [SWS_Pwm_10051], and [SWS_Pwm_20051] are applicable to the function Pwm_DeInit.⌋