SNIP_CLASSIC_PWM_SECTION_8_3_5_Pwm_SetOutputToIdle

8.3.5 Pwm_SetOutputToIdle [SWS_Pwm_91002] Definition of API function Pwm_SetOutputToIdle ⌈ Service Name Pwm_SetOutputToIdle Syntax void Pwm_SetOutputToIdle ( Pwm_ChannelType ChannelNumber ) Service ID [hex] 0x04 Sync/Async Asynchronous Reentrancy Reentrant for different channel numbers Parameters (in) ChannelNumber Numeric identifier of the PWM Parameters (inout) None Parameters (out) None Return value None Description Service sets the PWM output to the configured Idle state. Available via Pwm.h ⌋ [SWS_Pwm_00021] Upstream requirements: SRS_Pwm_12358 ⌈The function Pwm_SetOutputToIdle shall set immediately the PWM output to the configured Idle state.⌋ Regarding error detection, the requirements [SWS_Pwm_00117], [SWS_Pwm_00047], [SWS_Pwm_10051] and [SWS_Pwm_20051] are applicable to the function Pwm_SetOutputToIdle. [SWS_Pwm_10084] Upstream requirements: SRS_BSW_00171 ⌈The function Pwm_SetOutputToIdle shall be pre compile time configurable On/Off by the configuration parameter: PwmSetOutputToIdle.⌋ [SWS_Pwm_20084] Upstream requirements: SRS_BSW_00171 ⌈The function Pwm_SetOutputToIdle shall be configurable On/Off by the configuration parameter: PwmSetOutputToIdle {PWM_SET_OUTPUT_TO_IDLE_API}.⌋ [SWS_Pwm_10086] ⌈After the call of the function Pwm_SetOutputToIdle, variable period type channels shall be reactivated using the Api Pwm_SetPeriodAndDuty to activate the PWM channel with the new passed period.⌋ [SWS_Pwm_20086] ⌈After the call of the function Pwm_SetOutputToIdle, channels shall be reactivated using the Api Pwm_SetDutyCycle to activate the PWM channel with the old period.⌋ [SWS_Pwm_00119] ⌈After the call of the function Pwm_SetOutputToIdle, fixed period type channels shall be reactivated using only the API Pwm_SetDutyCycle to activate the PWM channel with the old period.⌋