SNIP_CLASSIC_PWM_SECTION_8_6_3_Configurable_interfaces

8.6.3 Configurable interfaces In this chapter all interfaces are listed where the target function could be configured. The target function is usually a call-back function. The names of these kinds of interfaces are not fixed because they are configurable. [SWS_Pwm_00105]⌈ Service Name Pwm_Notification_<#Channel> Syntax void Pwm_Notification_<#Channel> ( void ) Sync/Async Synchronous Reentrancy PWM user implementation dependant Parameters (in) None Parameters (inout) None Parameters (out) None Return value None Description The Pwm module shall call the function Pwm_Notification_<#Channel> accordingly to the last call of Pwm_EnableNotification for channel <#Channel>. Available via Pwm_Externals.h ⌋() [SWS_Pwm_00025] ⌈The Pwm module shall call the function Pwm_Notification_<#Channel> accordingly to the last call of Pwm_EnableNotification and Pwm_DisableNotification for channel <#Channel>.⌋ (SRS_SPAL_00157) [SWS_Pwm_00026] ⌈The Pwm module shall reset the interrupt flag associated to the notification Pwm_Notification_<#Channel>⌋ (SRS_SPAL_12129) [SWS_Pwm_10115] ⌈The Pwm module shall provide the functionality of Pwm_EnableNotification only when the configuration parameter PwmNotificationSupported is ON. ⌋ () [SWS_Pwm_20115] ⌈The Pwm module shall provide the functionality of Pwm_DisableNotification only when the configuration parameter PwmNotificationSupported is ON. ⌋ () [SWS_Pwm_30115] ⌈The Pwm module shall reset the interrupt flag associated to the notification only when the configuration parameter PwmNotificationSupported is ON. ⌋ () [SWS_Pwm_91005]⌈ Service Name IoHwAb_Pwm_NotifyReadyForPowerState<#Mode> Syntax void IoHwAb_Pwm_NotifyReadyForPowerState<#Mode> ( void ) Sync/Async Synchronous Reentrancy Non Reentrant Parameters (in) None Parameters (inout) None Parameters (out) None Return value None Description The API shall be invoked by the PWM Driver when the requested power state preparation for mode <#Mode> is completed. Available via IoHwAb_Pwm.h ⌋() [SWS_Pwm_00199] ⌈In case the PWM Driver is configured to support power state management with asynchronous transitions, this API shall be called to signal completion of the power transition preparation phase to the IoHwAbs module. This is a callback, this API is to be implemented in the IoHwAbs component.⌋()