SNIP_CLASSIC_SECOC_SECTION_10_1_2_SecOCGeneral

10.1.2 SecOCGeneral SWS Item [ECUC_SecOC_00002] Container Name SecOCGeneral Parent Container SecOC Description Contains the general configuration parameters of the SecOC module. Configuration Parameters SWS Item [ECUC_SecOC_00098] Parameter Name SecOCDefaultAuthenticationInformationPattern Parent Container SecOCGeneral Description The parameter describes the behaviour of SecOC when authentication build counter has reached the configuration value SecOCAuthenticationBuildAttempts, or the query of the freshness function returns E_NOT_OK or the calculation of the authenticator has returned a non-recoverable error such as returning E_ NOT_OK or KEY_FAILURE. If the configuration parameter is not present, Sec OC module shall remove the Authentic I-PDU from its internal buffer and cancel the transmission request If the configuration parameter is present, SecOC will use this value for each byte of Freshness Value and Authenticator when building the Authentication Information, and will not cancel the transmission request. Multiplicity 0..1 Type EcucIntegerParamDef Range 0 .. 255 Default value -- Post-Build Variant Multiplicity false Post-Build Variant Value false Multiplicity Configuration Class Pre-compile time X All Variants Link time -- Post-build time -- Value Configuration Class Pre-compile time X All Variants Link time -- Post-build time -- Scope / Dependency scope: local SWS Item [ECUC_SecOC_00007] Parameter Name SecOCDevErrorDetect Parent Container SecOCGeneral Description Switches the development error detection and notification on or off.  true: detection and notification is enabled.  false: detection and notification is disabled. Multiplicity