SNIP_CLASSIC_SECOC_SECTION_10_1_7_SecOCRxPduProcessing

10.1.7 SecOCRxPduProcessing SWS Item [ECUC_SecOC_00011] Container Name SecOCRxPduProcessing Parent Container SecOC Description Contains the parameters to configure the RxPdus to be verified by the SecOC module. Configuration Parameters SWS Item [ECUC_SecOC_00082] Parameter Name SecOCAuthDataFreshnessLen Parent Container SecOCRxPduProcessing Description The length of the external authentic PDU data in bits (uint16). Multiplicity 0..1 Type EcucIntegerParamDef Range 0 .. 65535 Default value -- Post-Build Variant Value false Value Configuration Class Pre-compile time X All Variants Link time -- Post-build time -- Scope / Dependency scope: ECU SWS Item [ECUC_SecOC_00081] Parameter Name SecOCAuthDataFreshnessStartPosition Parent Container SecOCRxPduProcessing Description This value determines the start position in bits (uint16) of the Authentic PDU that shall be passed on to the Freshness SWC. The bit counting is done according to TPS_SYST_01068 and the bit ordering is done according to TPS_SYST_01069. Multiplicity 0..1 Type EcucIntegerParamDef Range 0 .. 65535 Default value -- Post-Build Variant Value false Value Configuration Class Pre-compile time X All Variants Link time -- Post-build time -- Scope / Dependency scope: ECU SWS Item [ECUC_SecOC_00079] Parameter Name SecOCAuthenticationBuildAttempts Parent Container SecOCRxPduProcessing Description This parameter specifies the number of authentication build attempts. Multiplicity 0..1 Type EcucIntegerParamDef Range 0 .. 65535 Default value -- Post-Build Variant Value false Value Configuration Class Pre-compile time X All Variants Link time -- Post-build time -- Scope / Dependency scope: local SWS Item [ECUC_SecOC_00080] Parameter Name SecOCAuthenticationVerifyAttempts Parent Container SecOCRxPduProcessing Description This parameter specifies the number of authentication verify attempts that are to be carried out when the verification of the authentication information failed for a given Secured I-PDU. If zero is set, then only one authentication verification attempt is done. Multiplicity 0..1 Type EcucIntegerParamDef Range 0 .. 65535 Default value 0 Post-Build Variant Value false Value Configuration Class Pre-compile time X All Variants Link time -- Post-build time -- Scope / Dependency scope: local SWS Item [ECUC_SecOC_00095] Parameter Name SecOCAuthInfoTruncLength Parent Container SecOCRxPduProcessing Description This parameter defines the length in bits of the authentication code to be included in the payload of the Secured I-PDU. Multiplicity