SNIP_CLASSIC_SECOC_SECTION_8_6_2_SecOC_MainFunctionTx

8.6.2 SecOC_MainFunctionTx [SWS_SecOC_00176]⌈ Service Name SecOC_MainFunctionTx Syntax void SecOC_MainFunctionTx ( void ) Service ID [hex] 0x03 Description This function performs the processing of the SecOC module's authentication and verification processing for the Tx path. Per configured SecOCMainFunctionTx instance one SecOC_MainFunctionTx_<shortName> shall be implemented. Hereby <shortName> is the short name of the SecOCMainFunctionTx configuration container in the ECU configuration. Available via SchM_SecOC.h ⌋(SRS_BSW_00373, SRS_BSW_00425) [SWS_SecOC_00177]⌈ If the SecOC module was not previously initialized with a call to SecOC_Init, then a call to SecOC_MainFunctionTx shall simply return. ⌋ (SRS_SecOC_00005) [SWS_SecOC_00178]⌈ The cycle time of the SecOC_MainFunctionTx is configured by the parameter SecOCMainFunctionPeriodTx. ⌋ (SRS_SecOC_00025) [SWS_SecOC_00179]⌈ If SecOC_MainFunctionTx is scheduled, the SecOC shall firstly check if there are new Authentic I-PDUs to be authenticated. If yes the SecOC module shall process the authentication of each of the IPDUs identified as new subsequently in the very same main function call. ⌋ (SRS_SecOC_00025) [SWS_SecOC_00180]⌈ For each newly authenticated Authentic I-PDU, the SecOC module shall immediately trigger the transmission of the Secured I-PDU at the lower layer module by calling the PduR. ⌋ (SRS_SecOC_00025)