SNIP_CLASSIC_WDGM_FIGURE_Figure_7_2

Figure 7.2: Local Supervision Status For the transitions between the states of the Local Supervision Status the following rules apply: [SWS_WdgM_00268]⌈If the function WdgM_Init is successfully called, then for each Supervised Entity that is referenced from the Initial Mode ( WdgMInitialMode) (i.e. each Supervised Entity that is activated in the Initial Mode), the function WdgM_Init shall set the Local Supervision Status for this Supervised Entity to WDGM_LOCAL_STATUS_OK. And the counter for Failed Supervision Reference Cycles shall be set to zero (0). (see T ransition (10) in Figure 7.2). ⌋(SRS_BSW_00101) [SWS_WdgM_00269]⌈If the function WdgM_Init is successfully called, then for each Supervised Entity that is not referenced from the Initial Mode ( WdgMInitialMode), the function WdgM_Init shall set the Local Supervision Status for this Supervised Entity to WDGM_LOCAL_STATUS_DEACTIVATED (see T ransition (11) in Figure 7.2). If the function WdgM_Init is successfully called and the parameter WdgMInitialMode [ECUC_WdgM_00336] of this Supervised Entity in WdgMInitialMode is not configured to WDGM_LOCAL_STATUS_OK then the Watchdog Manager module shall set the Local Supervision Status for this Supervised Entity to WDGM_LOCAL_STATUS_DEACTIVATED. (see T ransition (11) in Figure 7.2)⌋(SRS_BSW_00101) [SWS_WdgM_00201]⌈If all values in three sets of results of Supervision (results of Alive Supervision, results of Deadline Supervision, results of Logical Supervision) for the Supervised Entity are correct and the Supervised Entity was in Local Supervision