SNIP_CLASSIC_WDGM_SECTION_8_3_9_WdgM_PerformReset

8.3.9 WdgM_PerformReset [SWS_WdgM_00264] Definition of API function WdgM_PerformReset Upstream requirements: SRS_BSW_00310, SRS_ModeMgm_09232 ⌈ Service Name WdgM_PerformReset Syntax void WdgM_PerformReset ( void ) Service ID [hex] 0x0f Sync/Async Synchronous Reentrancy Non Reentrant Parameters (in) None Parameters (inout) None Parameters (out) None Return value None Description Instructs the Watchdog Manager to cause a watchdog reset. Available via WdgM.h ⌋ [SWS_WdgM_00232] Upstream requirements: SRS_ModeMgm_09232 ⌈When this service is called, the Watchdog Manager shall set the trigger condition for all configured Watchdog Drivers to 0 (zero).⌋ Thereby, the hardware watchdogs will cause an external hardware reset. [SWS_WdgM_00233] Upstream requirements: SRS_ModeMgm_09232 ⌈After this service has been called, the Watchdog Manager shall not update the trigger condition anymore.⌋ When this API has been called, Global Supervision Status is not considered anymore. There are optional checks that are executed if and only if WdgMDevErrorDetect is enabled. [SWS_WdgM_00270] Upstream requirements: SRS_BSW_00323, SRS_BSW_00350 ⌈If the configuration parameter WdgMDevErrorDetect [ECUC_WdgM_00301] is enabled: The function WdgM_PerformReset shall report the error to default error tracer with error code WDGM_E_UNINIT, without any further effect, if the Watchdog Manager is in WDGM_GLOBAL_STATUS_DEACTIVATED.⌋ [SWS_WdgM_00401] Upstream requirements: SRS_BSW_00323, SRS_BSW_00350 ⌈If the configuration parameter WdgMDevErrorDetect [ECUC_WdgM_00301] is disabled: The function WdgM_PerformReset shall return without any effect if the Watchdog Manager is in WDGM_GLOBAL_STATUS_DEACTIVATED.⌋