Flash Test (FlsTst)

Service for Flash Test initialization.

Service for Flash Test De - Initialization.

Service for aborting the Flash Test.

Service for suspending current operation of the Flash Test, until Fls Tst_ Resume is called.

Service for continuing the Flash Test at the point it was suspended.

Service returns the current Flash Test exection state.

Service returns the Background Flash Test result.

Service returns the version information of this module.

Service returns the Flash Test result in background mode.

Service returns the Flash Test result in foreground mode.

Service returns error detais monitored from the Flash module.

Service executes a test of ECC hardware. This is only applicable in case the hardware provices such functionality.

Service for executing the Flash Test in background mode.

The function Fls Tst_ Test Completed shall be called every time when a complete test cycle had been tested.

Service returns the Foreground Flash Test result.

Service for executing foreground Flash Test.

This type of external data structure shall contain the initialization data for the Flash Test.

This is a state value returned by the API service Fls Tst_ Get Current State().

Return type of API service Fls Tst_ Get Result Fgnd().

This type specifies the identification (ID) for a Flash block to be tested in foreground mode, which is configured in the configuration structure.

This type shall specify implementation specific error information monitored in the Flash test module.

Type for test signature in foreground mode

Return type of API service Fls Tst_ Get Test Result Bgnd().

Type for test signature in background mode.

-

Type of error Related error code Error value Failure within Flash Test execution state FLSTST_ E_ STATE_ FAILURE 0x01 API parameter out of specified range FLSTST_ E_ PARAM_ INVALID 0x02 API service used without module initialization FLSTST_ E_ UNINIT 0x03 Flash Test module is already initialized FLSTST_ E_ ALREADY_ INITIALIZED 0x04 For Variant PB: Configuration pointer is a NULL pointer. For Variant PC: Configuration pointer is NOT a NULL pointer. FLSTST_ E_ INIT_ FAILED 0x05 Pointer is a NULL pointer FLSTST_ E_ PARAM_ POINTER 0x06

The function FlsTst_Init shall be called first before calling any other Flash Test functions except the function FlsTst_GetCurrentState . If this sequence is not respected, the error code FLSTST_E_UNINIT shall be reported to the Default Error Tracer (if development error detection is enabled).

Module Header File Imported Type Dem Rte_ Dem_ Type.h Dem _ Event Id Type Rte_ Dem_ Type.h Dem _ Event Status Type Std Std_ Types.h Std _ Return Type Std_ Types.h Std _ Version Info Type

[SWS_FlsTst_00028] Upstream requirements: SRS_SPAL_12163 ⌈The function FlsTst_DeInit shall de-initialize all Flash Test relevant registers and global variables that were initialized by FlsTst_Init.⌋

[SWS_FlsTst_00029] ⌈The function FlsTst_DeInit shall set the Flash Test module state to FLSTST_UNINIT.⌋

[SWS_FlsTst_00033] Upstream requirements: SRS_BSW_00323, SRS_BSW_00386, SRS_SPAL_12448, SRS_ FlsTst_14219 ⌈If development error detection is enabled and the parameter FgndBlockId is out of range, the DET error value FLSTST_E_PARAM_INVALID shall be raised and the func- tion shall return without any action with return value E_NOT_OK.⌋

[SWS_FlsTst_00050] Upstream requirements: SRS_FlsTst_14219 ⌈The function FlsTst_StartFgnd is only applicable for Foreground mode Flash Test operation.⌋

[SWS_FlsTst_00051] Upstream requirements: SRS_FlsTst_14219 ⌈The function FlsTst_StartFgnd shall be pre compile time configurable On/Off by the configuration parameter: FlsTst_StartFgndApi.⌋

[SWS_FlsTst_00061] Upstream requirements: SRS_FlsTst_14223 ⌈The function FlsTst_GetErrorDetails shall return the error details monitored from the Flash Test driver.⌋

[SWS_FlsTst_00062] Upstream requirements: SRS_BSW_00386, SRS_FlsTst_14223 ⌈The function FlsTst_GetErrorDetails shall be pre compile time configurable On/Off by the configuration parameter: FlsTst_GetErrorDetailsApi.⌋

[SWS_FlsTst_00064] Upstream requirements: SRS_FlsTst_14224 ⌈The function FlsTst_TestEcc shall execute a test of the ECC circuitry.⌋

[SWS_FlsTst_00065] Upstream requirements: SRS_BSW_00386, SRS_FlsTst_14224 ⌈The function FlsTst_TestEcc shall be pre compile time configurable On/Off by the configuration parameter: FlsTst_TestEccApi.⌋

Dem _ Set - Event Status Dem.h Called by SW - Cs or BSW modules to report monitor status information to the Dem. BSW modules calling Dem_ Set Event Status can safely ignore the return value. This API will be available only if ({Dem/ Dem Config Set/ Dem Event Parameter/ Dem Event Reporting Type} == STANDARD_ REPORTING)

Det _ Report Error Det.h Service to report development errors.

[SWS_FlsTst_00074] Upstream requirements: SRS_FlsTst_14212 ⌈The callback notifications shall be configurable as function pointers within the initial- ization data structure (FlsTst_ConfigType).⌋

[SWS_FlsTst_00075] Upstream requirements: SRS_FlsTst_14212 ⌈The callback notifications shall have no parameters and no return value.⌋

[SWS_FlsTst_00076] Upstream requirements: SRS_FlsTst_14212 ⌈If a callback notification is configured as null pointer, the Flash Test module shall not execute the callback.⌋

[SWS_FlsTst_00140] ⌈The length of a partial test is defined by the number of tested cells, which shall be tested in one scheduled task. (see [ECUC_FlsTst_00161]). The required time for a partial test without interruption is defined as "T est time". ⌋ Note: The partial test can be interrupted by a higher priority task at any time, because the Flash test does not require atomic sequences. It is the responsibility of the user to ensure that the interruptible partial test is finished before the scheduler interval is started(See Figure 7.2). [SWS_FlsTst_00142] ⌈A background test shall be aborted or suspended via the API services FlsTst_Abort() or FlsTst_Suspended(). The maximum latency time until the API call request is processed, shall be configurable (see [ECUC_FlsTst_00120]). ⌋ est

[SWS_FlsTst_00142] ⌈A background test shall be aborted or suspended via the API services FlsTst_Abort() or FlsTst_Suspended(). The maximum latency time until the API call request is processed, shall be configurable (see [ECUC_FlsTst_00120]). ⌋ est

[SWS_FlsTst_00143] Upstream requirements: SRS_FlsTst_14219 ⌈Foreground tests are defined as synchronous tests which shall not be interrupted. The execution of Foreground tests is configurable (see [ECUC_FlsTst_00086]) and can be called after module initialization at any time. ⌋

Figure 7.1: Background Test: Test Interval [SWS_FlsTst_00140] ⌈The length of a partial test is defined by the number of tested cells, which shall be tested in one scheduled task. (see [ECUC_FlsTst_00161]). The required time for a partial test without interruption is defined as "T est time". ⌋ Note: The partial test can be interrupted by a higher priority task at any time, because the Flash test does not require atomic sequences. It is the responsibility of the user to ensure that the interruptible partial test is finished before the scheduler interval is started(See Figure 7.2). [SWS_FlsTst_00142] ⌈A background test shall be aborted or suspended via the API services FlsTst_Abort() or FlsTst_Suspended(). The maximum latency time until the API call request is processed, shall be configurable (see [ECUC_FlsTst_00120]). ⌋ est

When FlsTstTestResultSignature is disabled, the function FlsTst_MainFunction shall set the overall r esult status for a test interval to FLSTST_RESULT_NOT_OK if at least one block test result is not ok regardless whether all blocks are already tested or not. Additionally the DEM FLSTST_E_FLSTST_FAILURE shall be triggered with the detection criteria "Fail" .

: Failure detection in back ground mode Long Description: This Extended Production Error shall be issued in case a failure is detected in background mode within a test interval. Detection Criteria: Fail At least one block within a test interval in background mode is NOT OK (see SWS _FlsTst_00167 ) Pass All blocks within a test interval in background mode are tested with the result OK.(see SWS_FlsTst_00161) Secondary Parameters: N/A Time Required : N/A Monitor Frequency continuous