AUTOSAR Classic System Services
Die System Services steuern den gesamten ECU-Lebenszyklus von Power-On über Wakeup, Betriebszustände, Modus-Arbitrierung (BswM) bis zum sicheren Herunterfahren und Programmlauf-Überwachung (WdgM).
خريطة المواضيع
BswM
35EcuM
65HTMSS
10SwCluC
47WdgM
19لا توجد بيانات عناصر لهذا الإصدار
Arti
Returns the version information of this module.
void Arti_GetVersionInfo(Std_VersionInfoType* VersionInfoPtr);Service to initialize the ARTI module
void Arti_Init(void);BswM
Function called by the Bsw M when a Bsw MUser Callout is executed. The function name and all function parameters are defined b y the Bsw MUser Callout Function configuration parameter. Any return values are ignored by the Bsw M.
void <BswMUserCalloutFunction> (implementation_specific -);Function called by Restart Task if the partition containing the Bsw M has been restarted.
void BswM_BswMPartitionRestarted (void);Function called by Can SM to indicate its current state. Ava ilable via Bsw M_ Can SM.h
void BswM_CanSM_CurrentState (NetworkHandleType Network, CanSM_BswMCurrentStateType CurrentState);Function called by Com M to indicate the current communication mode of a Com M channel.
void BswM_ComM_CurrentMode (NetworkHandleType Network, ComM_ModeType RequestedMode);Function is called by Com M to indicate the current mode of the PNC. AUTOSAR CP R20 - of Document ID : AUTOSAR_SWS_BSWModeManager
void BswM_ComM_CurrentPNCMode (PNCHandleType PNC, ComM_PncModeType CurrentPncMode);Function is called by Com M to signal a shutdown.
void BswM_ComM_InitiateReset (void);This function is called by the DCM in order to report an updated application.
void BswM_Dcm_ApplicationUpdated (void);Function called by DCM to inform the Bsw M about the current state of the communication mode.
void BswM_Dcm_CommunicationMode_CurrentState (NetworkHandleType Network, Dcm_CommunicationModeType RequestedMode);Deinitializes the BSW Mode Manager.
void BswM_Deinit (void);Function called Ecu M to indicate the current ECU Operation Mode.
void BswM_EcuM_CurrentState (EcuM_StateType CurrentState);Function called by Ecu M to indicate the current state of a wakeup source.
void BswM_EcuM_CurrentWakeup (EcuM_WakeupSourceType source, EcuM_WakeupStatusType state);Function called by Ecu M notify about current Status of the Run Request Protocol.
void BswM_EcuM_RequestedState (EcuM_StateType State, EcuM_RunStatusType CurrentState);Function called by Eth If to indicate the link state change of a certain Ethernet switch port group.
void BswM_EthIf_PortGroupLinkStateChg (EthIf_SwitchPortGroupIdxType PortGroupIdx, EthTrcv_LinkStateType PortGroupState);Function called by Eth SM to indicate its current state.
void BswM_EthSM_CurrentState (NetworkHandleType Network, EthSM_NetworkModeStateType CurrentState);Function called by Fr SM to indicate its current state.
void BswM_FrSM_CurrentState (NetworkHandleType Network, FrSM_BswM_StateType CurrentState);Returns the version information of this module.
void BswM_GetVersionInfo (Std_VersionInfoType* VersionInfo);Initializes the BSW Mode Manager.
void BswM_Init (const BswM_ConfigType* ConfigPtr);This API tells the Bsw M the desired communication status of the available networks. The status will typically be activated via COM I - PDU group switches.
void BswM_J1939DcmBroadcastStatus (uint16 NetworkMask);Notification of current J1939Nm state after state changes. AUTOSAR CP R20 - of Document ID : AUTOSAR_SWS_BSWModeManager
void BswM_J1939Nm_StateChangeNotification (NetworkHandleType Network, uint8 Node, Nm_StateType NmState);Function called by Lin SM to indicate the currently active schedule table for a specific LIN channel.
void BswM_LinSM_CurrentSchedule (NetworkHandleType Network, LinIf_SchHandleType CurrentSchedule);Function called by Lin SM to indicate its current state.
void BswM_LinSM_CurrentState (NetworkHandleType Network, LinSM_ModeType CurrentState);Function called by Lin TP to request a mode for the corresponding LIN channel. The Lin Tp_ Mode correlates to the LIN schedule table that should be used.
void BswM_LinTp_RequestMode (NetworkHandleType Network, LinTp_Mode LinTpRequestedMode);Main function of the Bsw M
void BswM_MainFunction (void);Function called by Nm to indicate a Car Wakeup.
void BswM_Nm_CarWakeUpIndication (NetworkHandleType Network);Notification of current Nm state after state changes.
void BswM_Nm_StateChangeNotification (NetworkHandleType Network, Nm_StateType currentState);Function called by Nv M to indicate the current block mode of an Nv M block.
void BswM_NvM_CurrentBlockMode (NvM_BlockIdType Block, NvM_RequestResultType CurrentBlockMode);Function called by Nv M to inform the Bsw M about the current state of a multi block job.
void BswM_NvM_CurrentJobMode (NvM_MultiBlockRequestType MultiBlockRequest, NvM_RequestResultType CurrentJobMode);Generic function call to request modes. This function shall only be used by other BSW modules that does not have a specific mode request interface.
void BswM_RequestMode (BswM_UserType requesting_user, BswM_ModeType requested_mode);Function called by Service Discovery to indicate current state of the Client Service (available/ down).
void BswM_Sd_ClientServiceCurrentState (uint16 SdClientServiceHandleId, Sd_ClientServiceCurrentStateType CurrentClientState);Function called by Service Discovery to indicate current status of the Consumed Eventgroup (available/ down).
void BswM_Sd_ConsumedEventGroupCurrentState (uint16 SdConsumedEventGroupHandleId, Sd_ConsumedEventGroupCurrentStateType ConsumedEventGroupState);Function called by Service Discovery to indicate current status of the Event Handler (requested/ released).
void BswM_Sd_EventHandlerCurrentState (uint16 SdEventHandlerHandleId, Sd_EventHandlerCurrentStateType EventHandlerStatus);Function called by Wdg M to request a partition reset.
void BswM_WdgM_RequestPartitionReset (ApplicationType Application);This structure contains all post - build configurable parameters of the BSW Mode AUTOSAR CP R20 - of Document ID : AUTOSAR_SWS_BSWModeManager Manager. A pointer to this structure is passed to the BSW Mode Manager initialization function for configuration.
This type identifies the modes that can be requested by Bsw M Users.
This type identifies a Bsw M User that makes mode requests to the Bsw M.
EcuM
Ecum_AbortWakeupAlarm aborts the wakeup alarm previously set by this user. EcuM_Abort WakeupAlarm is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_AbortWakeupAlarm (EcuM_UserType user);This callout shall provide driver initialization and other hardware-related startup activities in case of a power on reset.
void EcuM_AL_DriverInitOne (void);This callout shall provide driver initialization and other hardware-related startup activities for loading the post-build configuration data. Beware: Here only pre-compile and link-time configurable modules may be used.
void EcuM_AL_DriverInitZero (void);This callout shall provide driver initialization and other hardware-related startup activities in the wakeup case.
void EcuM_AL_DriverRestart (void);This callout shall take the code for resetting the ECU.
void EcuM_AL_Reset (EcuM_ResetType reset);If the configuration parameter EcuMSetProgrammableInterrupts is set to true, this callout Ecu M_AL_SetProgrammableInterrupts is executed and shall set the interrupts on ECUs with programmable interrupts.
void EcuM_AL_SetProgrammableInterrupts (void);This callout shall take the code for shutting off the power supply of the ECU. If the ECU cannot unpower itself, a reset may be an adequate reaction.
void EcuM_AL_SwitchOff (void);This callout is intended to provide a RAM integrity test. The goal of this test is to ensure that after a long SLEEP duration, RAM contents is still consistent. The check does not need to be exhaustive since this would consume quite some processing time during wakeups. A well designed check will execute quickly and detect RAM integrity defects with a sufficient probability. This specification does not make any assumption about the algorithm chosen for a particular ECU. The areas of RAM which will be checked have to be chosen carefully. It depends on the check algorithm itself and the task structure. Stack contents of the task executing the RAM check e.g. very likely cannot be checked. It is good practice to have the hash generation and checking in the same task and that this task is not preemptible and that there is only little activity between hash generation and hash check. The RAM check itself is provided by the system designer. In case of applied multi core and existence of Satellite-Ecu M(s): this API will be called by the Master-EcuM only.
uint8 EcuM_CheckRamHash (void);This callout is called by the EcuM to validate a wakeup source. If a valid wakeup has been detected, it shall be reported to EcuM via EcuM_ValidateWakeupEvent().
void EcuM_CheckValidation (EcuM_WakeupSourceType wakeupSource);This callout is called by the EcuM to poll a wakeup source. It shall also be called by the ISR of a wakeup source to set up the PLL and check other wakeup sources that may be connected to the same interrupt.
void EcuM_CheckWakeup (EcuM_WakeupSourceType wakeupSource);Clears wakeup events.
void EcuM_ClearWakeupEvent (EcuM_WakeupSourceType sources);This callout should evaluate some condition, like port pin or NVRAM value, to determine which post-build configuration shall be used in the remainder of the startup process. It shall load this configuration data into a piece of memory that is accessible by all BSW modules and shall return a pointer to the EcuM post-build configuration as a base for all BSW module post-build configrations.
const EcuM_ConfigType* EcuM_DeterminePbConfiguration (void);The ECU Manager Module calls EcuM_DisableWakeupSources to set the wakeup source(s) defined in the wakeupSource bitfield so that they are not able to wake the ECU up.
void EcuM_DisableWakeupSources (EcuM_WakeupSourceType wakeupSource);The ECU Manager Module calls EcuM_EnableWakeupSource to allow the system designer to notify wakeup sources defined in the wakeupSource bitfield that SLEEP will be entered and to adjust their source accordingly.
void EcuM_EnableWakeupSources (EcuM_WakeupSourceType wakeupSource);This API is called by any SW Module whose wakeup source is checked asynchronously (e.g. asynchronous Can Trcv Driver) and the Check of the Wakeup returns a negative Result (no Wakeup by this Source). The API cancels the CheckWakeupTimer for the WakeupSource. If the correponding CheckWakeupTimer is canceled the check of this wakeup source is finished.
void EcuM_EndCheckWakeup (EcuM_WakeupSourceType WakeupSource);The ECU State Manager will call the error hook if the error codes "ECUM_E_RAM_CHECK_ FAILED" or "ECUM_E_CONFIGURATION_DATA_INCONSISTENT" occur. In this situation it is not possible to continue processing and the ECU must be stopped. The integrator may choose the modality how the ECU is stopped, i.e. reset, halt, restart, safe state etc.
void EcuM_ErrorHook (uint16 reason);see EcuM_CheckRamHash
void EcuM_GenerateRamHash (void);EcuM_GetBootTarget returns the current boot target - see EcuM_SelectBootTarget. EcuM_Get BootTarget is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_GetBootTarget (EcuM_BootTargetType* target);EcuM_GetCurrentTime returns the current value of the EcuM clock (i.e. the time since battery connect). EcuM_GetCurrentTime is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_GetCurrentTime (EcuM_TimeType* time);Gets expired wakeup events.
EcuM_WakeupSourceType EcuM_GetExpiredWakeupEvents (void);EcuM_GetLastShutdownTarget returns the shutdown target of the previous shutdown process. EcuM_GetLastShutdownTarget is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_GetLastShutdownTarget (EcuM_ShutdownTargetType* shutdownTarget, EcuM_ShutdownModeType* shutdownMode);Gets pending wakeup events.
EcuM_WakeupSourceType EcuM_GetPendingWakeupEvents (void);EcuM_GetShutdownCause returns the selected shutdown cause as set by EcuM_Select ShutdownCause. EcuM_GetShutdownCause is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_GetShutdownCause (EcuM_ShutdownCauseType* shutdownCause);EcuM_GetShutdownTarget returns the currently selected shutdown target as set by EcuM_ SelectShutdownTarget. EcuM_GetShutdownTarget is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_GetShutdownTarget (EcuM_ShutdownTargetType* shutdownTarget, EcuM_ShutdownModeType* shutdownMode);Gets validated wakeup events.
EcuM_WakeupSourceType EcuM_GetValidatedWakeupEvents (void);Returns the version information of this module.
void EcuM_GetVersionInfo (Std_VersionInfoType* versioninfo);EcuM_GetWakeupTime returns the current value of the master alarm clock (the minimum absolute time of all user alarm clocks). EcuM_GetWakeupTime is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_GetWakeupTime (EcuM_TimeType* time);Instructs the ECU State Manager module to go into a sleep mode, Reset or OFF depending on the previously selected shutdown target.
Std_ReturnType EcuM_GoDownHaltPoll (EcuM_UserType UserID);Initializes the ECU state manager and carries out the startup procedure. The function will never return (it calls StartOS)
void EcuM_Init (void);If the configuration parameter EcuMResetLoopDetection is set to true, this callout EcuM_Loop Detection is called on every startup.
void EcuM_LoopDetection (void);The purpose of this service is to implement all activities of the ECU State Manager while the OS is up and running.
void EcuM_MainFunction (void);This call allows the system designer to notify that the GO OFF I state is about to be entered.
void EcuM_OnGoOffOne (void);This call allows the system designer to notify that the GO OFF II state is about to be entered.
void EcuM_OnGoOffTwo (void);Releases a POST RUN request previously done with a call to EcuM_RequestPOST_RUN. The service is intended for implementing AUTOSAR ports.
Std_ReturnType EcuM_ReleasePOST_RUN (EcuM_UserType user);Releases a RUN request previously done with a call to EcuM_RequestRUN. The service is intended for implementing AUTOSAR ports.
Std_ReturnType EcuM_ReleaseRUN (EcuM_UserType user);Places a request for the POST RUN state. Requests can be placed by every user made known to the state manager at configuration time. Requests for RUN and POST RUN must be tracked independently (in other words: two independent variables). The service is intended for implementing AUTOSAR ports.
Std_ReturnType EcuM_RequestPOST_RUN (EcuM_UserType user);Places a request for the RUN state. Requests can be placed by every user made known to the state manager at configuration time.
Std_ReturnType EcuM_RequestRUN (EcuM_UserType user);EcuM_SelectBootTarget selects a boot target. EcuM_SelectBootTarget is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_SelectBootTarget (EcuM_BootTargetType target);EcuM_SelectShutdownCause elects the cause for a shutdown. EcuM_SelectShutdownCause is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_SelectShutdownCause (EcuM_ShutdownCauseType target);EcuM_SelectShutdownTarget selects the shutdown target. EcuM_SelectShutdownTarget is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_SelectShutdownTarget (EcuM_ShutdownTargetType shutdownTarget, EcuM_ShutdownModeType shutdownMode);EcuM_SetAbsWakeupAlarm sets the user's wakeup alarm to an absolute point in time. EcuM_ SetAbsWakeupAlarm is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_SetAbsWakeupAlarm (EcuM_UserType user, EcuM_TimeType time);EcuM_SetClock sets the EcuM clock time to the provided value. This API is useful for testing the alarm services; Alarms that take days to expire can be tested. EcuM_SetClock is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_SetClock (EcuM_UserType user, EcuM_TimeType time);EcuM_SetRelWakeupAlarm sets a user's wakeup alarm relative to the current point in time. EcuM_SetRelWakeupAlarm is part of the ECU Manager Module port interface.
Std_ReturnType EcuM_SetRelWakeupAlarm (EcuM_UserType user, EcuM_TimeType time);Function called by BswM to notify about State Switch.
void EcuM_SetState (EcuM_StateType state);Sets the wakeup event.
void EcuM_SetWakeupEvent (EcuM_WakeupSourceType sources);Typically called from the shutdown hook, this function takes over execution control and will carry out GO OFF II activities.
void EcuM_Shutdown (void);This callout is invoked periodically in all reduced clock sleep modes. It is explicitely allowed to poll wakeup sources from this callout and to call wakeup notification functions to indicate the end of the sleep state to the ECU State Manager.
void EcuM_SleepActivity (void);This API is called by the ECU Firmware to start the CheckWakeupTimer for the corresponding WakeupSource. If EcuMCheckWakeupTimeout > 0 the CheckWakeupTimer for the Wakeup Source is started. If EcuMCheckWakeupTimeout <= 0 the API call is ignored by the EcuM.
void EcuM_StartCheckWakeup (EcuM_WakeupSourceType WakeupSource);This function implements the STARTUP II state.
void EcuM_StartupTwo (void);The callout shall start the given wakeup source(s) so that they are ready to perform wakeup validation.
void EcuM_StartWakeupSources (EcuM_WakeupSourceType wakeupSource);The callout shall stop the given wakeup source(s) after unsuccessful wakeup validation.
void EcuM_StopWakeupSources (EcuM_WakeupSourceType wakeupSource);After wakeup, the ECU State Manager will stop the process during the WAKEUP VALIDATION state/sequence to wait for validation of the wakeup event.This API service is used to indicate to the ECU Manager module that the wakeup events indicated in the sources parameter have been validated.
void EcuM_ValidateWakeupEvent (EcuM_WakeupSourceType sources);
A pointer to such a structure shall be provided to the ECU State Manager initialization routine for configuration.
This type describes the reset mechanisms supported by the ECU State Manager. It can be extended by configuration.
Result of the Run Request Protocol sent to BswM
This type describes the cause for a shutdown by the ECU State Manager. It can be extended by configuration.
This data type represents the modes of the ECU Manager module.
ECU State Manager states.
This data type represents the time of the ECU Manager module.
Unique value for each user.
EcuM_WakeupSourceType defines a bitfield with 5 pre-defined positions (see Range). The bitfield provides one bit for each wakeup source. In WAKEUP, all bits cleared indicates that no wakeup source is known. In STARTUP, all bits cleared indicates that no reason for restart or reset is known. In this case, ECUM_WKSOURCE_RESET shall be assumed.
The type describes the possible states of a wakeup source.
HTMSS
-
void HTMSS_GetVersionInfo(Std_VersionInfoType* versioninfo);Initializes the HTMSS module
void HTMSS_Init(const HTMSS_TestCfgType* ConfigPtr);The ECU State Manager will call the error hook if the HTMSS provided shutdown test results have a failure. In this situation, the integrator has to control the CPU processing based on the system requirements, i.e. reset, safe state etc...
void HTMSS_ShutdownTestErrorHook(void);Starts the MSTP configured tests
Std_ReturnType HTMSS_StartTest(HTMSS_TestGroupType GrpId);The ECU State Manager will call the error hook if the HTMSS provided startup test results have a failure. In this situation, the integrator has to control the CPU processing based on the system requirements, i.e. reset, safe state etc...
void HTMSS_StartupTestErrorHook(void);Returns current test status on requested test
HTMSS_TestStatusType HTMSS_GetTestStatus(HTMSS_TestGroupType GrpId, HTMSS_TestResultType* RequestTestResultPtr);Configuration data structure of HTMSS module
HTMSS_ Test Group Type describes the test group type Variation --
It describes the current test result Variation --
HTMSS_ Test Status Type describes status of test.
SwCluC
Returns the number of actually used - and thereby connected - handle sets Tags: atp.Status=draft
SwCluC_BManif_HandleIndexType SwCluC_BManif_GetNoOfHandleSets_< Resource Entry Group>_<Resource Entry>(void);Returns the number of actually used - and thereby connected - handle sets. Tags: atp.Status=draft
SwCluC_BManif_HandleIndexType SwCluC_BManif_GetNoOfHandleSets_< Resource Entry Group>(SwCluC_BManif_TableIndexType resIndex);Returns the Id of the connected Software Cluster for a Notifier Handle of a Provide Resource Entry or Provide Handle of a Require Resource Entry Tags: atp.Status=draft
SwCluC_BManif_SwClusterIdType SwCluC_BManif_GetConSwClusterId_< ResourceEntryGroup>_<Handle>(SwCluC_BManif_TableIndexType resIndex, SwCluC_BManif_HandleIndexType notifierSetIndex);Returns the Id of the connected Software Cluster for a Notifier Handle of a Provide Resource Entry or a Provide Handle of a Require Resource Entry Tags: atp.Status=draft
SwCluC_BManif_SwClusterIdType SwCluC_BManif_GetConSwClusterId_< ResourceEntryGroup>_<ResourceEntry>_<Handle>(SwCluC_BManif_HandleIndexType notifierSetIndex);Returns the Id of the connected Software Cluster for a Notifier Handle of a Provide Resource Entry or a Provide Handle of a Require Resource Entry Tags: atp.Status=draft
<handleType> SwCluC_BManif_GetHandle_<ResourceEntryGroup>_<Handle>(SwCluC_BManif_TableIndexType resIndex, SwCluC_BManif_HandleIndexType notifierSetIndex);Returns a handle of a Resource Entry in a Resource Entry Group Tags: atp.Status=draft
<handleType> SwCluC_BManif_GetHandle_<ResourceEntryGroup>_< ResourceEntry>_<Handle>(SwCluC_BManif_HandleIndexType notifierSetIndex);Returns the value of the Subscribed Interface Validity Marker. Tags: atp.Status=draft
uint32 SwCluC_BManif_GetValidityMarker(void);This callback function indicates that the signal of the primitive data item/event is ready for reception. It is an implementation of a <ComUser_CbkRxAck> callback. Tags: atp.Status=draft
void SwCluC_ComProxy_<BS>_CbkRxAck(CbkHandleIdType ComUserCbkHandleId);This function is called to acquire the transmit data of an I-PDU segment (N-PDU). Each call to this function provides the next part of the I-PDU data unless retry->TpDataState is TP_ DATARETRY. In this case the function restarts to copy the data beginning at the offset from the current position indicated by retry->TxTpDataCnt. The size of the remaining data is written to the position indicated by availableDataPtr Tags: atp.Status=draft
BufReq_ReturnType SwCluC_ComProxy_<BS>_ComCbkCopyTxData(CbkHandleIdType ComUserCbkHandleId, const PduInfoType* info, const RetryInfoType* retry, PduLengthType* availableDataPtr);This callback function indicates that COM has received a signal and parsed it as "invalid". It is an implementation of a <ComUser_CbkInv> callback. Tags: atp.Status=draft
void SwCluC_ComProxy_<BS>_COMCbkInv(CbkHandleIdType ComUserCbkHandleId);Indication of a received PDU from a lower layer communication interface module. Tags: atp.Status=draft
void SwCluC_ComProxy_<BS>_ComCbkRxIndication(CbkHandleIdType ComUserCbkHandleId, const PduInfoType* PduInfoPtr);This callback function indicates that the aliveTimeout after the last successful reception of the signal of the data item/event has expired (data element outdated). It is an implementation of a <ComUser_CbkRxTOut> callback. Tags: atp.Status=draft
void SwCluC_ComProxy_<BS>_COMCbkRxTOut(CbkHandleIdType ComUserCbkHandleId);This callback function indicates that the signal of the data item/event is already handed over by COM to the PDU router. It is an implementation of a <ComUser_CbkTxAck> callback. Tags: atp.Status=draft
void SwCluC_ComProxy_<BS>_COMCbkTAck(CbkHandleIdType ComUserCbkHandleId);This callback function indicates that an error occurred when the signal of the data item/event was handed over by COM to the PDU router. It is an implementation of a <ComUser_CbkTx Err> callback. Tags: atp.Status=draft
void SwCluC_ComProxy_<BS>_COMCbkTErr(CbkHandleIdType ComUserCbkHandleId);Called after an I-PDU has been received via the TP API, the result indicates whether the transmission was successful or not. Tags: atp.Status=draft
void SwCluC_ComProxy_<BS>_ComCbkTpRxIndication(CbkHandleIdType ComUserCbkHandleId, Std_ReturnType result);Within this API, the upper layer module (called module) shall check whether the available data fits into the buffer size reported by PduInfoPtr->SduLength. If it fits, it shall copy its data into the buffer provided by PduInfoPtr->SduDataPtr and update the length of the actual copied data in PduInfoPtr->SduLength. If not, it returns E_NOT_OK without changing PduInfoPtr. Tags: atp.Status=draft
Std_ReturnType SwCluC_ComProxy_<BS>_ComCbkTriggerTransmit(CbkHandleIdType ComUserCbkHandleId, PduInfoType* PduInfoPtr);The lower layer communication interface module confirms the transmission of a PDU, or the failure to transmit a PDU. Tags: atp.Status=draft
void SwCluC_ComProxy_<BS>_ComCbkTxConfirmation(CbkHandleIdType ComUserCbkHandleId, Std_ReturnType result);This callback function indicates that the timeout of TransmissionAcknowledgementRequest for sending the signal of the data item/event has expired. It is an implementation of a <ComUser_ CbkTxTOut> callback. Tags: atp.Status=draft
void SwCluC_ComProxy_<BS>_COMCbkTxTOut(CbkHandleIdType ComUserCbkHandleId);SwCluC_ComProxy_Init is intended to allocate and initialize system resources used by the ComProxy linked to this specific socked. Tags: atp.Status=draft
void SwCluC_ComProxy_Init_<SwCluCComBaseSocket>(void);SwCluC_DcmProxy_Init is intended to allocate and initialize system resources used by the DCM Proxy linked to this specific socked. Tags: atp.Status=draft
void SwCluC_DcmProxy_Init_<SwCluCDcmBaseSocket>(void);SwCluC_DemProxy_Init is intended to allocate and initialize system resources used by the DEM Proxy linked to this specific socked. Tags: atp.Status=draft
void SwCluC_DemProxy_Init_<SwCluCDemBaseSocket>(void);SwCluC_FiMProxy_Init is intended to allocate and initialize system resources used by the FiM Proxy linked to this specific socked. Tags: atp.Status=draft
void SwCluC_FiMProxy_Init_<SwCluCFiMBaseSocket>(void);This function is called to provide the received data of an I-PDU segment (N-PDU) to the upper layer. Each call to this function provides the next part of the I-PDU data. The size of the remaining data is written to the position indicated by bufferSizePtr. Tags: atp.Status=draft
BufReq_ReturnType SwCluC_LdComProxy_<BS>_LdComCbkCopyRxData(CbkHandleIdType LdComUserCbkHandleId, const PduInfoType* info, PduLengthType* bufferSizePtr);This function is called to acquire the transmit data of an I-PDU segment (N-PDU). Each call to this function provides the next part of the I-PDU data unless retry->TpDataState is TP_ DATARETRY. In this case the function restarts to copy the data beginning at the offset from the current position indicated by retry->TxTpDataCnt. The size of the remaining data is written to the position indicated by availableDataPtr Tags: atp.Status=draft
BufReq_ReturnType SwCluC_LdComProxy_<BS>_LdComCbkCopyTxData(CbkHandleIdType LdComUserCbkHandleId, const PduInfoType* info, const RetryInfoType* retry, PduLengthType* availableDataPtr);Indication of a received PDU from a lower layer communication interface module. Tags: atp.Status=draft
void SwCluC_LdComProxy_<BS>_LdComCbkRxIndication(CbkHandleIdType LdComUserCbkHandleId, const PduInfoType* PduInfoPtr);This function is called at the start of receiving an N-SDU. The N-SDU might be fragmented into multiple N-PDUs (FF with one or more following CFs) or might consist of a single N-PDU (SF). The service shall provide the currently available maximum buffer size when invoked with TpSdu Length equal to 0. Tags: atp.Status=draft
BufReq_ReturnType SwCluC_LdComProxy_<BS>_LdComCbkStartOfReception(CbkHandleIdType LdComUserCbkHandleId, const PduInfoType* info, PduLengthType TpSduLength, PduLengthType* bufferSizePtr);Called after an I-PDU has been received via the TP API, the result indicates whether the transmission was successful or not. Tags: atp.Status=draft
void SwCluC_LdComProxy_<BS>_LdComCbkTpRxIndication(CbkHandleIdType LdComUserCbkHandleId, Std_ReturnType result);This function is called after a Signal has been transmitted via the TP-API on its network. Tags: atp.Status=draft
void SwCluC_LdComProxy_<BS>_LdComCbkTpTxConfirmation(CbkHandleIdType LdComUserCbkHandleId, Std_ReturnType result);Within this API, the upper layer module (called module) shall check whether the available data fits into the buffer size reported by PduInfoPtr->SduLength. If it fits, it shall copy its data into the buffer provided by PduInfoPtr->SduDataPtr and update the length of the actual copied data in PduInfoPtr->SduLength. If not, it returns E_NOT_OK without changing PduInfoPtr. Tags: atp.Status=draft
Std_ReturnType SwCluC_LdComProxy_<BS>_LdComCbkTriggerTransmit(CbkHandleIdType LdComUserCbkHandleId, PduInfoType* PduInfoPtr);The lower layer communication interface module confirms the transmission of a PDU, or the failure to transmit a PDU. Tags: atp.Status=draft
void SwCluC_LdComProxy_<BS>_LdComCbkTxConfirmation(CbkHandleIdType LdComUserCbkHandleId, Std_ReturnType result);SwCluC_LdComProxy_Init is intended to allocate and initialize system resources used by the LdComProxy linked to this specific socked. Tags: atp.Status=draft
void SwCluC_LdComProxy_Init_<SwCluCLdComBaseSocket>(void);SwCluC_NvMProxy_Init is intended to allocate and initialize system resources used by the Nv MProxy linked to this specific socked. Tags: atp.Status=draft
void SwCluC_NvMProxy_Init_<SwCluCNvMBaseSocket>(void);This function informs the NvM proxy of the SwCluC about the end of the NvM_ReadAll job.
void SwCluC_NvMProxy_MultiBlockReadAllJobFinished(void);SwCluC_OsProxy_Init is intended to allocate and initialize system resources used by the Os Proxy linked to this specific socked Tags: atp.Status=draft
void SwCluC_OsProxy_Init_<SwCluCOsProxyOsBaseSocket>(void);SwCluC_Xcc_Init is intended to allocate and initialize system resources used by the Software Cluster Connection. It initializes interface memory which might be needed to be read by other Software Clusters but it is not allowed to do any read access to memory of any another Software Cluster. Tags: atp.Status=draft
void SwCluC_Xcc_Init1(void);SwCluC_Xcc_Init2 is intended to allocate and initialize system resources used by the Software Cluster Connection. It can execute initializations which require a read access to interface memory of another Software Clusters. Tags: atp.Status=draft
void SwCluC_Xcc_Init2(void);Type to code control flags for the connection process. Bit 0..14 are reserved. Tags: atp.Status=draft
Type for the global ID value of a resource Tags: atp.Status=draft
Index type to address a set of handles in the immutable and modifiable interface table Tags: atp.Status=draft
Tags: atp.Status=draft
Type for the global ID value of a resource Tags: atp.Status=draft
Type for the guard value of a resource Tags: atp.Status=draft
Type to code the properties of a resource. Bit 0..5 are reserved. Tags: atp.Status=draft
Type to code the type of a resource Tags: atp.Status=draft
Type of the Software Cluster's ID value Tags: atp.Status=draft
Index type to address the immutable and modifiable interface table Tags: atp.Status=draft
Generic function pointer type according C default type for functions Tags: atp.Status=draft
WdgM
Indicates to the Watchdog Manager that a Checkpoint within a Supervised Entity has been reached.
Std_ReturnType WdgM_CheckpointReached (WdgM_SupervisedEntityIdType SEID, WdgM_CheckpointIdType CheckpointID);De - initializes the Watchdog Manager.
void WdgM_DeInit (void);Returns SEID that first reached the stat e WDGM_ LOCAL_ STATUS_ EXPIRED.
Std_ReturnType WdgM_GetFirstExpiredSEID (WdgM_SupervisedEntityIdType* SEID);Returns the global supervision status of the Watchdog Manager.
Std_ReturnType WdgM_GetGlobalStatus (WdgM_GlobalStatusType* Status);Returns the supervision status of an individual Supervised Entity.
Std_ReturnType WdgM_GetLocalStatus (WdgM_SupervisedEntityIdType SEID, WdgM_LocalStatusType* Status);Returns the current mode of the Watchdog Manager.
Std_ReturnType WdgM_GetMode (WdgM_ModeType* Mode);Returns the version information of this module.
void WdgM_GetVersionInfo (Std_VersionInfoType* VersionInfo);Initializes the Watchdog Manager.
void WdgM_Init (const WdgM_ConfigType* ConfigPtr);Performs the processing of the cyclic Watchdog Manager jobs.
void WdgM_MainFunction (void);Instructs the Watchdog Manager to cause a watchdog reset.
void WdgM_PerformReset (void);Sets the current mode of Watchdog Manager.
Std_ReturnType WdgM_SetMode (WdgM_ModeType Mode);-
This type identifies a Checkpoint in the context of a Supervised Entity for the Watchdog Manager. Note that an individual Checkpoint can only be identified by the pair of Supervised Entity ID and Checkpoint ID.
This structure contains all post - build configurable parameters of the Watchdog Manager. A pointer to this structure is passed to the Watchdog Manager initialization function for configuration. AUTOSAR CP R20 - of D ocument ID : AUTOSAR_SWS_WatchdogManager
This type shall be used for variables that represent the global supervision status of the Watchdog Manager module.
This type shall be used for variables that represent the current status of supervision for individual Supervised Entitie s.
The category of Mode Declaration Group Wdg M_ Mode is EXPLICIT_ ORDER, The attribute value for the Mode Declaration are set as following: "SUPERVISION_ OK" = 0 "SUPERVISION_ FAILED" = 1 "SUPERVISION_ EXPIRED" = 2 "SUPERVISION_ STOPPED" = 3 "SUP ERVISION_ DEACTIVATED" = 4 The on Transition Value is defined as 255
This type distinguishes the different modes that were configured for the Watchdog Manager.
This type identifies an individual Supervised Entity for the Watchdog Manager.
دليل العنقودمولَّد بالذكاء الاصطناعي
ينسق دورات حياة وحدات التحكم الإلكترونية (ECU)، ويحكّم أوضاع التشغيل، ويضمن مراقبة Watchdog الوظيفية.
ينسق دورات حياة وحدات التحكم الإلكترونية (ECU)، ويحكّم أوضاع التشغيل، ويضمن مراقبة Watchdog الوظيفية.
تتحكم مجموعة الوحدات System Services في دورة حياة وحدة التحكم الإلكترونية (ECU) بدءاً من مراحل الإقلاع المبكرة حتى إيقاف التشغيل، وتحكّم أوضاع التشغيل، وتضمن مراقبة تنفيذ البرامج لتلبية متطلبات الأمان الوظيفي SafetyConceptStatusReport ص. 15. ويجمع ECU State Manager طلبات الأوضاع ويفوض قرارات الحالة إلى BSW Mode Manager، بينما يراقب Watchdog Manager التنفيذ ويتحكم في Watchdog Driver SWS_ECUStateManager ص. 103. وعند حدوث انتهاكات جسيمة في تدفق التحكم، توقف المجموعة تشغيل Watchdog وتفرض إعادة تعيين آمنة للعتاد [SWS_WdgM_00232].
تتحكم مجموعة الوحدات System Services في دورة حياة وحدة التحكم الإلكترونية (ECU)، وتبدل أوضاع التشغيل، وتؤمّن مراقبة تنفيذ البرامج وفقاً لمتطلبات الأمان الوظيفي SafetyConceptStatusReport ص. 15. ويعمل BSW Mode Manager (BswM) كجهة اتخاذ قرار مركزية، بينما ينسق ECU State Manager (EcuM) المراحل الخاصة بالعتاد مثل StartPreOS وSleep وShutdown، وينقل الطلبات إلى BswM SWS_ECUStateManager ص. 103. ويتم تطبيق مراقبة تنفيذ البرامج بواسطة Watchdog Manager (WdgM)، الذي ينفذ مراقبات النشاط (Alive) والمهلة النهائية (Deadline) وتدفق التحكم، ويحث العتاد عبر Watchdog Driver (Wdg) [SWS_Wdg_00155].
مخطط السياق: بنية System Services وتعاونها مع BSW وRTE والعتاد. المصادر: SWS_ECUStateManager ص. 34، AUTOSAR_EXP_ModeManagementGuide ص. 61.
أثناء التشغيل الجاري، تتجمع طلبات مثل RUN أو POST_RUN في EcuM، والذي يرسلها مجمعة إلى BswM [SWS_BswM_91004]. وبعد تقييم القواعد المكونة، يحدد BswM الحالة عبر EcuM_SetState، وهو ما يتم الإبلاغ عنه للمكونات عبر RTE [SWS_EcuM_04116]. وفي مراحل النوم، تتم معالجة أحداث الاستيقاظ عبر آلة حالة معيارية (NONE، PENDING، VALIDATED، EXPIRED) والإشارة بها بشكل متزامن إلى BswM [SWS_BswM_00131].
مخطط التسلسل: مسار تفاعل ECU Mode Handling بين SW-C وEcuM وBswM وRTE. المصادر: SWS_ECUStateManager ص. 103، ModeManagementGuide ص. 34.
إذا حدث خطأ مراقبة حرج في WdgM، تنتقل حالة المراقبة إلى WDGM_GLOBAL_STATUS_STOPPED، وبناءً على ذلك يتم إيقاف حث Watchdog ويطلق العتاد إعادة تعيين للنظام [SWS_WdgM_00232]. وتبلغ المجموعة عن أخطاء التكوين أو الاستدعاء بشكل معياري إلى Default Error Tracer (Det) [SWS_EcuM_03026].
1. بنية النظام ودور مجموعة الوحدات
تُشكّل حزمة وحدات System Services العمود الفقري الوظيفي لـ AUTOSAR Classic Platform. وهي تتضمن BSW Mode Manager (BswM)، وECU State Manager (EcuM)، وWatchdog Manager (WdgM)، بالإضافة إلى Watchdog Driver (Wdg) القريب من العتاد SWS_ECUStateManager ص. 35. وتتحكم هذه الوحدات معًا في دورة الحياة الشاملة لوحدة التحكم الإلكترونية (ECU)، وتنسق أوضاع التشغيل القريبة من العتاد وأوضاع التشغيل التطبيقية، وتضمن مراقبة تسلسل تنفيذ البرامج زمنيًا ومنطقيًا لضمان السلامة الوظيفية SafetyConceptStatusReport ص. 15.
في البنية الطبقية لـ AUTOSAR، تقع BswM وEcuM وWdgM في طبقة System Services أعلى طبقات التجريد وبرامج التشغيل، بينما يتولى Watchdog Driver (Wdg)، بوصفه جزءًا من Microcontroller Abstraction Layer (MCAL)، التعامل مع سجلات العتاد لمؤقت مراقبة التشغيل (Watchdog-Timer) [SWS_Wdg_00106]. ويعمل EcuM في هذا السياق، في صورته المرنة (EcuM Flex)، بوصفه حلقة وصل بالعتاد لتسلسلات الإقلاع المبكر وإيقاف التشغيل المتأخر قبل بدء تشغيل نظام التشغيل (OS) أو بعده. ولم يعد يمتلك آلة حالات معقدة خاصة به لأوضاع التطبيق، بل يفوّض التحكيم في الأوضاع إلى BswM SWS_ECUStateManager ص. 103. وترتبط معايير التشخيص الخارجية، مثل UDS (ISO 14229) وبروتوكولات إدارة الشبكة، مباشرةً بتقييم القواعد في BswM عبر واجهات BSW محددة (مثل الخدمة 0x28 CommunicationControl عبر Dcm) [SWS_BswM_00048].
مخطط السياق: بنية System Services وتعاونها مع BSW وRTE والعتاد. المصادر: SWS_ECUStateManager ص. 34، AUTOSAR_EXP_ModeManagementGuide ص. 61.
2. التفاعل ومسارات الاتصال المتبادل بين الوحدات
يتميز التفاعل داخل الحزمة بعلاقات تحكم وإبلاغ محددة بوضوح. ففي إطار ECU Mode Handling، يستقبل EcuM طلبات لحالات مثل RUN أو POST_RUN من مكونات البرمجيات (SW-Cs) ويمرر نتيجة التحكيم المجمعة عبر [SWS_BswM_91004] إلى BswM ModeManagementGuide ص. 34. وبما أن EcuM لا يتخذ قرار انتقال خاصًا به، يقوم BswM بتقييم القواعد المنطقية المكونة ويوجه الحالة المستهدفة بشكل تزامني عبر EcuM_SetState إلى [SWS_EcuM_04116]. بعد ذلك، يعكس EcuM هذه الحالة عبر RTE إلى التطبيق ويؤكد لـ BswM حالة التنفيذ الحالية عبر BswM_EcuM_CurrentState [SWS_BswM_91003].
يربط مسار تفاعل موازٍ بين BswM وWdgM وWdg. حيث تُبلغ مكونات البرمجيات ووحدات BSW عن الوصول إلى نقاط تحقق (Checkpoints) محددة إلى WdgM، الذي يستنتج منها حالة المراقبة المحلية والعامة SWS_WatchdogManager ص. 51. ويوفر WdgM تغييرات حالة المراقبة المحلية عبر منافذ أوضاع (Mode-Ports) مقدمة [SWS_WdgM_00148]. واعتمادًا على حالة النظام العامة العليا، يغيّر BswM وضع تشغيل Watchdog Manager عبر WdgM_SetMode [SWS_WdgM_00154]. ويقوم WdgM بعد ذلك، عبر Watchdog Interface (WdgIf)، بتهيئة Watchdog Driver (Wdg) والتحكم في إطلاق إشارات العتاد (Hardware-Triggering) عبر Wdg_SetTriggerCondition [SWS_Wdg_00155].
مخطط التسلسل: مسار تفاعل ECU Mode Handling بين SW-C وEcuM وBswM وRTE. المصادر: SWS_ECUStateManager ص. 103، ModeManagementGuide ص. 34.
3. التزامن وإعادة الدخول وسياقات المهام
يتوزع تنفيذ System Services بشكل حتمي على مستويات المهام الدورية، ومعاودات الاتصال غير المتزامنة، وسياقات المقاطعة. ويتحمل BswM_MainFunction الحمل الدوري الرئيسي لإدارة الأوضاع، حيث يُستدعى في سياق مهمة نظام التشغيل بواسطة مجدول BSW (SchM) ويعالج جميع القواعد التي يلزم تقييمها بشكل مؤجل [SWS_BswM_00053]. وإذا حدثت وقائع تتطلب تقييمًا فوريًا للقواعد، فتتم معالجتها مباشرةً بشكل متزامن في سياق دلالة BSW أو SW-C-API المستدعية ModemanagementGuide ص. 31.
في الأنظمة متعددة الأنوية، تفرض المعايير تخصيصًا صارمًا للموارد. وقد صُمم BswM_Init ليكون قابلاً لإعادة الدخول المشروطة، لإتاحة إنشاء مثيلات منفصلة لكل قسم (Partition) أو نواة معالج [SWS_BswM_00002]. وخلال مرحلتي السكون والتوقف المؤقت، يحجز EcuM موارد نظام تشغيل (OS) خاصة بالنواة (RES_AUTOSAR_ECUM_<core#>) لتأمين التزامن بين الأنوية الرئيسية والتابعة [SWS_EcuM_03010]. ويُستدعى تهيئة برنامج التشغيل عبر EcuM_AL_DriverInitZero وEcuM_AL_DriverInitOne على كل نواة بشكل منفصل، ولا يقوم إلا بتهيئة وحدات MCAL المحلية للنواة [SWS_EcuM_04145]. ويُعد مسح أحداث الاستيقاظ عبر EcuM_ClearWakeupEvent غير قابل للمقاطعة صراحةً، ويجوز إجراؤه من سياقات المهام وكذلك سياقات المقاطعة [SWS_EcuM_02807].
4. دورات الحياة النموذجية وأوضاع التشغيل
تنقسم دورة حياة وحدة التحكم الإلكترونية (ECU) معياريًا إلى المراحل STARTUP وUP وSHUTDOWN وSLEEP [SWS_EcuM_91005]. وتبدأ المرحلة STARTUP قبل بدء تشغيل نظام التشغيل (OS) في التسلسل StartPreOS باستدعاء EcuM_Init، وتقييم سبب إعادة الضبط، وتحميل تكوين ما بعد البناء (Post-Build) عبر EcuM_DeterminePbConfiguration AUTOSAR_SWS_ECUStateManager ص. 38. وبعد تسليم التحكم إلى نظام التشغيل عبر StartOS، يقوم EcuM في StartPostOS بتهيئة SchM وكذلك BswM [SWS_EcuM_02934]. بعد ذلك، يتولى BswM التحكم ويبدأ تشغيل وحدات BSW المتبقية والتطبيق.
أثناء التشغيل الفعلي (المرحلة UP)، يدير EcuM وBswM الوضعين RUN وPOST_RUN بالإضافة إلى خدمة Alarm Clock الاختيارية SWS_ECUStateManager ص. 75. وعند الانتقال إلى حالة السكون (SLEEP)، تميّز الحزمة هيكليًا بين HALT (إيقاف CPU) وPOLL (تردد CPU منخفض) SWS_ECUStateManager ص. 54. وفي مرحلة مسبقة، يُلغي الاستدعاء WdgM_DeInit تهيئة Watchdog Manager ويضبط مهلات الإطلاق (Trigger-Timeouts) لتفادي عمليات إعادة الضبط غير المرغوب فيها أثناء إيقاف التشغيل [SWS_WdgM_00261]. وفي تسلسل الاستطلاع (Poll)، يتوقف EcuM في حلقة فحص مع استدعاءات دورية لـ EcuM_SleepActivity وEcuM_CheckWakeupHook، إلى أن يتم اكتشاف حدث استيقاظ [SWS_EcuM_03020].
تمر أحداث الاستيقاظ المكتشفة بإدارة حالات صارمة بدءًا من ECUM_WKSTATUS_NONE مرورًا بـ PENDING وصولاً إلى VALIDATED أو EXPIRED [SWS_EcuM_04091]. ويشير EcuM إلى كل تغيير في الحالة بشكل تزامني باستخدام BswM_EcuM_CurrentWakeup إلى BswM [SWS_BswM_00131]. ويحمي التحقق من صحة الاستيقاظ من اضطرابات الناقل العابرة ويراقب النافذة الزمنية باستخدام مؤقتات تحقق قابلة للتهيئة [SWS_EcuM_04004]. وإذا انتهت دورة الحياة في SHUTDOWN، يُعطّل OffPreOS كلاً من BswM وSchM، قبل أن يعيد OffPostOS ضبط وحدة التحكم الإلكترونية أو فصل الطاقة عنها عبر استدعاءات التكامل (Callouts) مثل EcuM_AL_Reset أو EcuM_AL_SwitchOff AUTOSAR_SWS_ECUStateManager ص. 49.
مخطط الحالات: آلة حالات مصادر الاستيقاظ لـ EcuM مع إشعار BswM. المصادر: AUTOSAR_SWS_ECUStateManager ص. 60، [SWS_EcuM_04091].
5. معالجة الأخطاء، وتتبع DET، وتخفيض الأداء
لاكتشاف أخطاء وقت التشغيل والتكوين، تدمج الحزمة آليات إبلاغ موحدة إلى Default Error Tracer (Det). فإذا حاولت كيان ما إرسال تحرير عبر EcuM_ReleasePOST_RUN دون طلب مسبق، يُبلغ EcuM عن خطأ التطوير ECUM_E_MISMATCHED_RUN_RELEASE إلى Det [SWS_EcuM_03026]. وتُسجل الطلبات المتعددة من نفس المستخدم باستخدام ECUM_E_MULTIPLE_RUN_REQUESTS [SWS_EcuM_03025]. وبالمثل، يراقب WdgM استدعاءات واجهة برمجة التطبيقات (API) في الحالة غير المهيأة ويُبلغ عن WDGM_E_UNINIT في حال استدعاء الخدمات قبل اكتمال التهيئة [SWS_WdgM_00288].
تعتمد مراقبة السلامة على التحكم الوظيفي ثلاثي المستويات لـ WdgM (مراقبة الحيوية Alive Supervision، ومراقبة المواعيد النهائية Deadline Supervision، ومراقبة مسار التحكم المنطقي) SafetyConceptStatusReport ص. 47. وإذا أدى خطأ مراقبة إلى انتهاك حدود تحمل الأخطاء، تتغير حالة المراقبة العامة من WDGM_GLOBAL_STATUS_OK مرورًا بـ FAILED إلى WDGM_GLOBAL_STATUS_EXPIRED وأخيرًا STOPPED [SWS_WdgM_00387]. وفي هذه الحالة، يضبط WdgM شرط الإطلاق لجميع برامج تشغيل Watchdog على 0، مما يجعل عتاد Watchdog يعيد ضبط المتحكم الدقيق على الفور [SWS_WdgM_00232]. ولإجراء عمليات إعادة ضبط طارئة خاضعة للتحكم، يوفر WdgM الخدمة WdgM_PerformReset التي توقف إعادة الإطلاق المستمرة وتفرض إعادة ضبط العتاد [SWS_WdgM_00264]. وللتأمين بعد فترات السكون الطويلة، يتحقق EcuM أيضًا باستخدام EcuM_CheckRamHash من اتساق الذاكرة المتطايرة لتفادي عمليات إعادة التشغيل الخاطئة عند تلف RAM [SWS_EcuM_02921].
يستند هذا الدليل إلى مواصفات AUTOSAR Classic Platform R20-11 ويلخص بنية وآليات حزمة وحدات System Services.
Module im Cluster
AUTOSAR Run-Time Interface (Arti)
AUTOSAR Classic System Services-Modul AUTOSAR Run-Time Interface (Arti, Spezifikation: AUTOSAR_CP_SWS_ARTI.pdf, AUTOSAR_SWS_ClassicPlatformARTI.pdf).
BSW Mode Manager (BswM)
Arbitrates mode requests and executes action lists to control system state transitions.
ECU State Manager (EcuM)
Controls ECU lifecycle states: Startup, Run, PostRun, Sleep, and Shutdown.
HW Test Manager on Startup and Shutdown (HTMSS)
AUTOSAR Classic System Services-Modul HW Test Manager on Startup and Shutdown (HTMSS, Spezifikation: AUTOSAR_CP_SWS_HWTestManager.pdf, AUTOSAR_SWS_HWTestManager.pdf).
BSW Scheduler Module (SchM)
AUTOSAR Classic System Services-Modul BSW Scheduler Module (SchM, Spezifikation: AUTOSAR_SWS_BSW_Scheduler.pdf).
Software Cluster Connection (SwCluC)
AUTOSAR Classic System Services-Modul Software Cluster Connection (SwCluC, Spezifikation: AUTOSAR_CP_SWS_SoftwareClusterConnection.pdf, AUTOSAR_SWS_SoftwareClusterConnection.pdf).
Watchdog Manager (WdgM)
Performs alive supervision, deadline supervision, and logical program flow monitoring.
gemini-3.8-flash-low· 2026-10-13 · الأصل الألماني